SSHing into your Raspberry Pi
Secure Shell (SSH) is a way to remotely access your Pi from any computer connected to the same network as your Pi; this means you can have it running in your room while accessing it with your laptop elsewhere on campus. Unfortunately, WashU’s network system makes this more complicated than normal, so we need to set up SMTP on your Pi in order to email its IP address to you.
For the initial set up of the pi, follow this guide here. You will need a monitor, mouse, and keyboard for the rest of this tutorial but afterwards they will not be needed once you’re connected on another device. These items can be found in Urbauer 015-- Please use only the monitors not connected to a computer, and return everything you use to its original place after finishing. If your Pi is not a 3 or Zero W, you will also need an Ethernet cable.
- On the device you want to use to access your Pi, download and install the SSH client PuTTY: https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html
- Boot up your Pi. If this is the first time, you may be presented with the raspi-config menu; otherwise open the command prompt and type sudo raspi-config to access it. Enable SSH and then exit with finish.
- On your Pi, connect to wustl-guest-2.0 on the top right corner of your screen. Then hover over the network icon to find the Pi’s public IP address.
- Open PuTTY. Where it says host name, type the IP address, omitting the “/” and everything afterwards. Make sure your device is connected to the same network. For port number use 22 and for connection type select the SSH option. Click “open.”
- Note that if you have OS X (Mac), ssh is installed by default. To use it, open Terminal and type ssh pi@<<IP address>> and replacing the <<IP address>> with the IP address of your Pi. Then, enter raspberry as the password and follow the prompts to change your password.
- A command terminal will pop up. It may take a while for any text to show up. When prompted, type pi as your login and raspberry as your password, and then you should have access to the Pi’s terminal! It will then suggest you change your password, which is advisable to do as soon as possible for security reasons.
- When ready, type sudo halt to shut down or sudo reboot to restart. Always halt before pulling the plug.
Emailing the IP address
Upon future reboots the Pi may use different addresses, preventing you from SSHing into it when you don’t have access to a monitor to check it. Now we will configure the Pi to email its address to you every time it starts up.
For the quickest set up, download this bash script onto your pi: File:Setup ip emailing 2.bash. In the terminal cd to its directory and type
replacing wustl-key with yours. If you would like to understand what the script is executing, follow these steps:
- Install ssmtp:
sudo apt-get update && apt-get install ssmtp
- Install mailutils:
sudo apt-get install mailutils
- Type sudo nano /etc/ssmtp/ssmtp.conf. In the document that appears, change/add the following lines:
AuthUseremail@example.com AuthPass=ese205rulz FromLineOverride=YES mailhub=smtp.gmail.com:587 UseSTARTTLS=YES
- Save and exit by hitting ctrl+X, then y, then enter.
- Ensure Sendmail is turned off by using the following lines in the command prompt:
$ sudo service sendmail stop $ sudo mkdir /root/.bakup $ sudo mv /usr/sbin/sendmail /root/.bakup $ sudo ln -s /usr/local/ssmtp/sbin/ssmtp /usr/sbin/sendmail
- You should be able to send emails from your Pi now from the address firstname.lastname@example.org. To test this, type echo "This is a test" | mail -s "Test" email@example.com and check your inbox.
sudo nano /etc/ip_emailer.sh
to create a new script. In the new file, write the lines
#!/bin/bash ifconfig -a | mail -s "RasPi IP" firstname.lastname@example.org
- Save and exit with ctrl+X.
- Make the script executable with
chmod +x /etc/ip_emailer.sh
- To schedule this script to be run upon reboot, type
sudo nano crontab –e
- At the bottom of the script, add the line
Save and exit.
- Reboot the Pi. You should receive an email containing its IP address you can now use to SSH into your Pi from anywhere on campus! If you do not receive an email, the Pi may be having trouble connecting to the network; try moving it to a different location or trying again later.
If your Pi suddenly stops emailing you one day and you are sure the network is fine, and running echo "This is a test" | mail -s "Test" email@example.com in the terminal gives you errors, try reinstalling mailutils and ssmpt:
$ sudo apt-get remove mailutils $ sudo apt-get remove ssmtp $ sudo apt-get install mailutils $ sudo apt-get install ssmtp
And test it again.
Beyond the Command Prompt
If you wish to access the full Pi desktop and not just the command prompt from your laptop, follow this guide to set up a VNC server.