Difference between revisions of "MagSpoof"

From ESE205 Wiki
Jump to: navigation, search
(Imitate a Magnetic Strip)
 
Line 1: Line 1:
 
[[Category:Projects]]
 
[[Category:Projects]]
 
[[Category:Fall 2017 Projects]]
 
[[Category:Fall 2017 Projects]]
 +
 +
===== Project Summary =====
 +
Our Project aims to enable RFID communication of WUSTL ID cards and Dorm Key Cards. We will use an Attiny85 micro controller to drive a motor driver. The motor driver will output the RFID signals to an inductor. The inductor should acts as an amplifier to the RFID signal that will be readable by a magnetic cars swiper. The Attiny85 will hold up to 4 cards and should have an indicator light for what card is currently in use. The Attiny85 will be programmed using an Arudino Microcontoller.
 +
 +
===== Contributors =====
 +
Nathan Jarvis </br>
 +
Jonathon Severns </br>

Revision as of 13:08, 14 September 2017


Project Summary

Our Project aims to enable RFID communication of WUSTL ID cards and Dorm Key Cards. We will use an Attiny85 micro controller to drive a motor driver. The motor driver will output the RFID signals to an inductor. The inductor should acts as an amplifier to the RFID signal that will be readable by a magnetic cars swiper. The Attiny85 will hold up to 4 cards and should have an indicator light for what card is currently in use. The Attiny85 will be programmed using an Arudino Microcontoller.

Contributors

Nathan Jarvis </br> Jonathon Severns </br>