Difference between revisions of "Longboard sensor module log"

From ESE205 Wiki
Jump to: navigation, search
Line 3: Line 3:
 
-Danny Andreev
 
-Danny Andreev
  
 +
==Week 1==
 +
Planning begins. BOM plan. Gant chart. What data to track and when.
  
== Week 1==
+
==Week 2==
 +
Further preparation and planning. Need to have the project worked out so we know every part we will need.
 +
 
 +
== Week 3==
 
We've started developing the CAD model of all of the components to make a box that holds the sensors and the Raspi. Ideally the print V1 should be done by the end of the week. We've ordered all the components and have started working on learning the libraries necessary to communicate between the Raspi and the external sensors.
 
We've started developing the CAD model of all of the components to make a box that holds the sensors and the Raspi. Ideally the print V1 should be done by the end of the week. We've ordered all the components and have started working on learning the libraries necessary to communicate between the Raspi and the external sensors.
  
 
[[Category:Logs]]
 
[[Category:Logs]]
 
[[Category:Fall 2017 Logs]]
 
[[Category:Fall 2017 Logs]]

Revision as of 13:54, 27 September 2017

Group Members

-Sam Ragsdale -Danny Andreev

Week 1

Planning begins. BOM plan. Gant chart. What data to track and when.

Week 2

Further preparation and planning. Need to have the project worked out so we know every part we will need.

Week 3

We've started developing the CAD model of all of the components to make a box that holds the sensors and the Raspi. Ideally the print V1 should be done by the end of the week. We've ordered all the components and have started working on learning the libraries necessary to communicate between the Raspi and the external sensors.