Difference between revisions of "Longboard sensor module log"

From ESE205 Wiki
Jump to: navigation, search
(Created page with "Week 1: We've started developing the CAD model of all of the components to make a box that holds the sensors and the Raspi. Ideally the print V1 should be done by the end of t...")
 
Line 1: Line 1:
Week 1:
+
== Group Members ==
 +
-Sam Ragsdale
 +
-Danny Andreev
 +
 
 +
 
 +
== Week 1==
 
We've started developing the CAD model of all of the components to make a box that holds the sensors and the Raspi. Ideally the print V1 should be done by the end of the week. We've ordered all the components and have started working on learning the libraries necessary to communicate between the Raspi and the external sensors.
 
We've started developing the CAD model of all of the components to make a box that holds the sensors and the Raspi. Ideally the print V1 should be done by the end of the week. We've ordered all the components and have started working on learning the libraries necessary to communicate between the Raspi and the external sensors.
 +
 +
[[Category:Logs]]
 +
[[Category:Fall 2017 Logs]]

Revision as of 12:04, 27 September 2017

Group Members

-Sam Ragsdale -Danny Andreev


Week 1

We've started developing the CAD model of all of the components to make a box that holds the sensors and the Raspi. Ideally the print V1 should be done by the end of the week. We've ordered all the components and have started working on learning the libraries necessary to communicate between the Raspi and the external sensors.