Difference between revisions of "LED Control with LPD8806 Library + Arduino"

From ESE205 Wiki
Jump to: navigation, search
(Creating an instance of the LPD8806 class)
(Creating an instance of the LPD8806 class)
Line 17: Line 17:
 
<source lang = "c">LPD8806 strip2 = LPD8806(48)//creates an LPD8806 object with Arduino SPI pins, (ie, on the Arduino Mega, these pins are 51 for the data pin and 52 for the clock pin)</source>
 
<source lang = "c">LPD8806 strip2 = LPD8806(48)//creates an LPD8806 object with Arduino SPI pins, (ie, on the Arduino Mega, these pins are 51 for the data pin and 52 for the clock pin)</source>
  
*<source lang="c++">LPD8806()</source>
+
*<code>LPD8806()</code>
 
This is a blank constructor, you must set the number of LEDs, data and clock pin separately using <code>updatePins(uint8_t dpin, uint8_t cpin)</code>, <code>updatePins() //for hardware SPI</code>, and <code>updateLength(uint16_t n)</code>.
 
This is a blank constructor, you must set the number of LEDs, data and clock pin separately using <code>updatePins(uint8_t dpin, uint8_t cpin)</code>, <code>updatePins() //for hardware SPI</code>, and <code>updateLength(uint16_t n)</code>.
  

Revision as of 15:31, 1 May 2017

Getting Started

The LPD8806 library is used to control LPD8806/LPD8803/LPD8809 PWM LED driver chips, strips and pixels. The link for downloading and instructions for installing the library can be found here. [1]

Creating an instance of the LPD8806 class

The LPD8806 library has three constructors:

  • LPD8806(uint16_t n, uint8_t dpin, uint8_t cpin)
    

This constructor takes in the number of LEDs in the strip, the data pin (port on arduino connected to DI), and the clock pin (port on arduino connected to CI).

example:

LPD8806 strip1 = LPD8806(48, 51, 52)//creates an LPD8806 object to control 48 lights, with data pin on 51, and clock pin on 52
  • LPD8806(uint16_t n)

This constructor takes in the number of LEDs to control, and relies on the Arduino's hardware SPI. These pins vary for each Arduino, so make sure you have it connected to the right pins.

example:

LPD8806 strip2 = LPD8806(48)//creates an LPD8806 object with Arduino SPI pins, (ie, on the Arduino Mega, these pins are 51 for the data pin and 52 for the clock pin)
  • LPD8806()

This is a blank constructor, you must set the number of LEDs, data and clock pin separately using updatePins(uint8_t dpin, uint8_t cpin), updatePins() //for hardware SPI, and updateLength(uint16_t n).

example:

LPD8806 strip3 = new LPD8806(); //create LPD8806 object
strip3.updatePins(51,52); //set data pin to 51, clock pin to 52
strip3.updateLength(48); //set length to 48