Difference between revisions of "Cocktail Maker Log"

From ESE205 Wiki
Jump to: navigation, search
(Week of Febuary 11)
(Week of Febuary 11)
Line 53: Line 53:
 
Whole group: ~3hrs~: worked on design flaws, must return some parts. discussed compilation of parts
 
Whole group: ~3hrs~: worked on design flaws, must return some parts. discussed compilation of parts
  
Cj Wilson: ~1.5 hr~ Sketched design for bottle holders and researched code for the pumps now on trello.
+
2/14 Cj Wilson: ~1.5 hr~ Sketched design for bottle holders and researched code for the pumps now on trello.
+
 
<gallery>
+
2/17/19 Whole Group: Flow Chart for arduino pins
bottle holder sketch.jpg
+
 
</gallery>
+
Goals for Next Week:
 +
 
 +
Complete arduino blinker
 +
 
 +
Test out materials
 +
 
 +
Solidify Flow chart
 +
 
 +
Decide on bottle size and purchase
 +
 
 +
3d print night light from different source
 +
 
 +
 
 
[[Category:Logs]]
 
[[Category:Logs]]
 
[[Category:Spring 2019 Logs]]
 
[[Category:Spring 2019 Logs]]

Revision as of 11:44, 18 February 2019

Week of January 27th

Cj Wilson: ~2 hours~ Created trello, formed general Gantt Chart, edited wiki, found some materials.

Whole Group: ~2 hours~ Formatted and found material prices

Goals for Next week:

  • Order parts
  • Finalize project idea
  • Create drawing of prototype
  • Start designing 3D parts
  • Work on if not complete the night light challenge

Week of February 4

Whole group:~1.5 hours~ Brainstormed ideas for construction and solidified parts

Wika: Ordered parts - weight sensor, tubing, pump

Cj Wilson ~1hr~ Compiled list of 3D printed parts needed and designed spout

Tom ~1hr~ Work on presentation

Whole group: ~3hrs~ Worked on night light challenge (circuit), and completed blink with arduino

Whole group: ~3 hours~ Soldered the NL perfboard, designed and sent to printing for the NL 3D case, put parts in locker, created presentation

Diagram of perfboard
















Goals for next week:

Test out parts

Find Coding

Week of Febuary 11

Whole group: ~3hrs~: worked on design flaws, must return some parts. discussed compilation of parts

2/14 Cj Wilson: ~1.5 hr~ Sketched design for bottle holders and researched code for the pumps now on trello.

2/17/19 Whole Group: Flow Chart for arduino pins

Goals for Next Week:

Complete arduino blinker

Test out materials

Solidify Flow chart

Decide on bottle size and purchase

3d print night light from different source