Difference between revisions of "Cocktail Maker Log"

From ESE205 Wiki
Jump to: navigation, search
(Week of Febuary 11)
(Week of Febuary 11)
Line 52: Line 52:
 
==Week of Febuary 11==
 
==Week of Febuary 11==
 
Whole group: ~3hrs~: worked on design flaws, must return some parts. discussed compilation of parts
 
Whole group: ~3hrs~: worked on design flaws, must return some parts. discussed compilation of parts
Cj Wilson: ~1.5 hr~ Sketched design for bottle holders and researched code for the pumps.  
+
 
 +
Cj Wilson: ~1.5 hr~ Sketched design for bottle holders and researched code for the pumps now on trello.
 +
 +
<gallery>
 +
bottle holder sketch.jpeg
 +
</gallery>
 
[[Category:Logs]]
 
[[Category:Logs]]
 
[[Category:Spring 2019 Logs]]
 
[[Category:Spring 2019 Logs]]

Revision as of 12:49, 15 February 2019

Week of January 27th

Cj Wilson: ~2 hours~ Created trello, formed general Gantt Chart, edited wiki, found some materials.

Whole Group: ~2 hours~ Formatted and found material prices

Goals for Next week:

  • Order parts
  • Finalize project idea
  • Create drawing of prototype
  • Start designing 3D parts
  • Work on if not complete the night light challenge

Week of February 4

Whole group:~1.5 hours~ Brainstormed ideas for construction and solidified parts

Wika: Ordered parts - weight sensor, tubing, pump

Cj Wilson ~1hr~ Compiled list of 3D printed parts needed and designed spout

Tom ~1hr~ Work on presentation

Whole group: ~3hrs~ Worked on night light challenge (circuit), and completed blink with arduino

Whole group: ~3 hours~ Soldered the NL perfboard, designed and sent to printing for the NL 3D case, put parts in locker, created presentation

Diagram of perfboard
















Goals for next week:

Test out parts

Find Coding

Week of Febuary 11

Whole group: ~3hrs~: worked on design flaws, must return some parts. discussed compilation of parts

Cj Wilson: ~1.5 hr~ Sketched design for bottle holders and researched code for the pumps now on trello.