Blink Box Log

From ESE205 Wiki
Revision as of 20:11, 15 September 2017 by Yuanxiaogao (talk | contribs) (Created page with "Weekly log for Blink Box project<br /> Yuanxiao Gao, Samuel Hoff<br /> ==Week of September 8== <br /> We met with Mo, our TA to discuss how we should proceed with our proje...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Weekly log for Blink Box project

Yuanxiao Gao, Samuel Hoff

Week of September 8

We met with Mo, our TA to discuss how we should proceed with our project.

We determined that we are going to 3-D print a box that will be equipped with a camera, raspberry pi, and a locking mechanism. The purpose of this is to unlock or remain locked based on the state of the user’s eyes. Since it is very difficult to detect a true blink, we will use a three-stage passcode. The way this passcode will be input is by flashing an LED and then taking a picture of the user’s face three times. Each time the picture will be assessed by the raspberry pi and, depending on if the state of the eyes in each state matched the current passcode, the box will unlock or not. We also met with Dr. Feher and discussed what the progression of this project is likely to look like. First, we are to figure out facial detection (if we fail at that we will find a more reasonable form of user input). Once this is done, we will upload this code to a raspberry pi and get it to compile there. After this, we will make the box and wire the LEDs and relay to the raspberry pi so that everything works together properly.

Week of September 15