Difference between revisions of "ADC (MCP3202) + Raspberry Pi 3"

From ESE205 Wiki
Jump to: navigation, search
Line 1: Line 1:
 
[[File:Mcp3202 pdip-8.png|thumb|left|MCP3202 ADC layout]]
 
[[File:Mcp3202 pdip-8.png|thumb|left|MCP3202 ADC layout]]
 +
#'''Orient the ADC in the right direction''' - The semicircle on the top of the ADC should face upwards. If it is flipped upside down, all the wiring will be wrong, and can be difficult to debug.
 +
#'''Wire the SPI Pins''' - There are specific pins on the Pi 3 to
 +
 +
[[File:Raspberry Pi 3 Pinout.png|thumb|left|Pin map of Raspberry Pi 3]]
  
 
[[Category:HowTos]]
 
[[Category:HowTos]]

Revision as of 21:56, 2 May 2018

MCP3202 ADC layout
  1. Orient the ADC in the right direction - The semicircle on the top of the ADC should face upwards. If it is flipped upside down, all the wiring will be wrong, and can be difficult to debug.
  2. Wire the SPI Pins - There are specific pins on the Pi 3 to
Pin map of Raspberry Pi 3