Difference between revisions of "Gatorade Maker"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
==Overview== | ==Overview== | ||
| − | Have you ever tried a Gatorade mix and you end up with not enough powder or too much | + | Have you ever tried a Gatorade mix and you end up with not enough powder or too much? The solution to this would be "The Gatorade Maker". This project aims at creating a system that pours powder and water to make a Gatorade mix. The user will choose from 3 preset options. These options are sweet, Gatorade recommended, and mild. Also, 3 preset amounts of Gatorade. The system will dispense the powder and water in an appropriate amount in the glass. This will allow you to be worry-free about the accuracy of the water and powder you will have in your drink. |
==Team Members== | ==Team Members== | ||
Revision as of 19:37, 6 October 2017
Overview
Have you ever tried a Gatorade mix and you end up with not enough powder or too much? The solution to this would be "The Gatorade Maker". This project aims at creating a system that pours powder and water to make a Gatorade mix. The user will choose from 3 preset options. These options are sweet, Gatorade recommended, and mild. Also, 3 preset amounts of Gatorade. The system will dispense the powder and water in an appropriate amount in the glass. This will allow you to be worry-free about the accuracy of the water and powder you will have in your drink.
Team Members
- Fazeela Kazmi
- Jacob Pinter
- Natalie Ng (TA)
Objectives
- A successful project would allow the system to accurately dispense the powder and water in a glass, in an amount needed for the mix the user chooses off a menu.
Challanges
- learning to code with Arduino
- How to dispense ingredients cleanly/neatly/accurately
- The building of the dispenser
- Keeping up with the schedule
Gantt Chart
Budget
- Tubing $7.99
- Buttons $4.95
- Stepper Motor $17.50
- Auger- 3D Print
- Tank for Water $21
- T Shaped PVC Pipe (Holds Auger) $2.23
- Arduino Uno Rev- given
- Solenoid Valve $9.95
- Solderless Bread Board $6.95 (x2)
- TIP120 Darlington Transistor $.95
- 1k Ohm Resistor $1.00
- Diode $.15
- Hookup Wires $6.95
- Load Sensor 5 kg $9.95
- A4988 Stepper Driver $1.88
- 12V 2A Adapter $4.29
