Difference between revisions of "Don't Fret"
Jump to navigation
Jump to search
| Line 29: | Line 29: | ||
* K271J15C0GF5TL2 $0.27 | * K271J15C0GF5TL2 $0.27 | ||
* REA221M1CBK-0811P $0.13 x4 | * REA221M1CBK-0811P $0.13 x4 | ||
| − | # | + | ## Resistors |
* MFR-25FRF52-4K7 $0.12 x2 | * MFR-25FRF52-4K7 $0.12 x2 | ||
* MFR-25FRF52-100K $0.10 x6 | * MFR-25FRF52-100K $0.10 x6 | ||
| Line 37: | Line 37: | ||
* MFR-25FRF52-300R $0.12 x2 | * MFR-25FRF52-300R $0.12 x2 | ||
| − | # | + | ### Other Materials |
* Resistor Trimmer $0.38 | * Resistor Trimmer $0.38 | ||
* 3mm LED $1.92 | * 3mm LED $1.92 | ||
| Line 49: | Line 49: | ||
* stereo 6.35mm jack $1.46 x2 | * stereo 6.35mm jack $1.46 x2 | ||
| − | # | + | #### Notes |
*All materials are from Mouser unless otherwise noted* | *All materials are from Mouser unless otherwise noted* | ||
**need to confirm | **need to confirm | ||
Revision as of 00:53, 7 February 2018
Overview
The goal of this project is to create a device that takes a sound input, specifically from a guitar, and outputs a manipulated sound. The device will utilize a Raspberry Pi to take the input from an instrument and return an edited sound. The coding will most likely be done in C and allows for a unique effects from the standard reverb, fuzz, etc. effects as well as extensive capability to reprogram.
Link to Log: https://classes.engineering.wustl.edu/ese205/core/index.php?title=Don%27t_Fret_Log
Team Members
- Chance Bayles
- GraceAnne Aldred
- Jared Malkin
- TA: John Fordice
Objectives
- Find resources
- Program Raspberry Pi
Challenges
- Learn to program a Raspberry Pi
- Allowing Raspberry Pi to take input (instrument) and give output (amplifier or microphone)
Materials
- Capacitors
- SR211C682MARTR1 $0.22 x5
- SR211C104KARTR1 $0.11 x3
- ECE-A1EKA4R7 $0.23 x3
- K271J15C0GF5TL2 $0.27
- REA221M1CBK-0811P $0.13 x4
- Resistors
- MFR-25FRF52-4K7 $0.12 x2
- MFR-25FRF52-100K $0.10 x6
- MFR-25FRF52-1M $0.10 x2
- MFR-25FRF52-300K $0.12
- MFR-25FRF52-49K9 $0.10
- MFR-25FRF52-300R $0.12 x2
- Other Materials
- Resistor Trimmer $0.38
- 3mm LED $1.92
- Op-amp rail-to-rail, pdip8 $0.36**
- 12bit ADC, p-dip8 $2.66**
- socket dor dip8 $0.10 x2
- 3PDT footswitch $7.77
- SPDT toogle switch $2.11
- off-on pushbutton $10.62** x2
- 2.54 pitch pin header $3.95** (Digi-Key)
- stereo 6.35mm jack $1.46 x2
- Notes
- All materials are from Mouser unless otherwise noted*
- need to confirm
- May vary depending on additional features***
- need to confirm
www.mouser.com
Ghant Chart
Made in Excel (need to import)
