Difference between revisions of "Gatorade Maker"
Jump to navigation
Jump to search
(→Budget) |
(→Budget) |
||
| Line 40: | Line 40: | ||
*[https://www.bc-robotics.com/shop/diode-rectifier-1a-50v/1N4001 Diode $.15] | *[https://www.bc-robotics.com/shop/diode-rectifier-1a-50v/1N4001 Diode $.15] | ||
*[https://www.bc-robotics.com/shop/premium-malemale-jumper-wires-40-x-6″/ Hookup Wires $6.95] | *[https://www.bc-robotics.com/shop/premium-malemale-jumper-wires-40-x-6″/ Hookup Wires $6.95] | ||
| − | *[ | + | *[https://www.amazon.com/KNACRO-Converter-Breakout-Portable-Electronic/dp/B07469KSJC/ref=sr_1_8?s=industrial&ie=UTF8&qid=1507753868&sr=1-8&keywords=HX711 Load Cell 5 kg and Converter $8.50] |
*[https://store.arduino.cc/usa/arduino-motor-shield-rev3 Motor Shield $22] | *[https://store.arduino.cc/usa/arduino-motor-shield-rev3 Motor Shield $22] | ||
Revision as of 20:43, 11 October 2017
Overview
Have you ever tried a Gatorade mix and you end up with not enough powder or too much? The solution to this would be "The Gatorade Maker". This project aims at creating a system that pours powder and water to make a Gatorade mix. The user will choose from 3 preset options. These options are sweet, Gatorade recommended, and mild. Also, 3 preset amounts of Gatorade. The system will dispense the powder and water in an appropriate amount in the glass. This will allow you to be worry-free about the accuracy of the water and powder you will have in your drink.
Team Members
- Fazeela Kazmi
- Jacob Pinter
- Natalie Ng (TA)
Objectives
- A successful project would allow the system to accurately dispense the powder and water in a glass, in an amount needed for the mix the user chooses off a menu.
Challanges
- learning to code with Arduino
- How to dispense ingredients cleanly/neatly/accurately
- The building of the dispenser
- Keeping up with the schedule
Gantt Chart
Budget
- Tubing $7.99
- Buttons $4.95
- Stepper Motor $17.50
- Auger- 3D Print
- Tank for Water $7.26
- T Shaped PVC Pipe (Holds Auger) $2.23
- Arduino Uno Rev- given
- Solenoid Valve $9.95
- Solderless Bread Board $6.95 (x2)
- TIP120 Darlington Transistor $.95
- 1k Ohm Resistor $1.00
- Diode $.15
- Hookup Wires $6.95
- Load Cell 5 kg and Converter $8.50
- Motor Shield $22
