Difference between revisions of "Gatorade Maker"
Jump to navigation
Jump to search
(→Budget) |
|||
| Line 31: | Line 31: | ||
*[http://openbuildspartstore.com/nema-17-stepper-motor/ Stepper Motor $17.50] | *[http://openbuildspartstore.com/nema-17-stepper-motor/ Stepper Motor $17.50] | ||
*Auger- 3D Print | *Auger- 3D Print | ||
| − | *[https://www. | + | *[https://www.walmart.com/ip/Arrow-H2O-2-5-Gal-Slimline-Beverage-Dispenser-Blue/15915151?action=product_interest&action_type=title&beacon_version=1.0.2&bucket_id=irsbucketdefault&client_guid=e052e00a-15f2-4ea8-8fda-b3e7f55d9920&config_id=2&customer_id_enc&findingMethod=p13n&guid=e052e00a-15f2-4ea8-8fda-b3e7f55d9920&item_id=15915151&parent_anchor_item_id=51200565&parent_item_id=51200565&placement_id=irs-2-m2&reporter=recommendations&source=new_site&strategy=PWVUB&visitor_id=WnJ6K1brR1MMogVI9aiZaM Tank for Water $7.26] |
*[https://www.lowes.com/pd/LASCO-1-1-2-in-Dia-PVC-Sch-40-Tee/3344584 T Shaped PVC Pipe (Holds Auger) $2.23] | *[https://www.lowes.com/pd/LASCO-1-1-2-in-Dia-PVC-Sch-40-Tee/3344584 T Shaped PVC Pipe (Holds Auger) $2.23] | ||
*Arduino Uno Rev- given | *Arduino Uno Rev- given | ||
Revision as of 22:22, 9 October 2017
Overview
Have you ever tried a Gatorade mix and you end up with not enough powder or too much? The solution to this would be "The Gatorade Maker". This project aims at creating a system that pours powder and water to make a Gatorade mix. The user will choose from 3 preset options. These options are sweet, Gatorade recommended, and mild. Also, 3 preset amounts of Gatorade. The system will dispense the powder and water in an appropriate amount in the glass. This will allow you to be worry-free about the accuracy of the water and powder you will have in your drink.
Team Members
- Fazeela Kazmi
- Jacob Pinter
- Natalie Ng (TA)
Objectives
- A successful project would allow the system to accurately dispense the powder and water in a glass, in an amount needed for the mix the user chooses off a menu.
Challanges
- learning to code with Arduino
- How to dispense ingredients cleanly/neatly/accurately
- The building of the dispenser
- Keeping up with the schedule
Gantt Chart
Budget
- Tubing $7.99
- Buttons $4.95
- Stepper Motor $17.50
- Auger- 3D Print
- Tank for Water $7.26
- T Shaped PVC Pipe (Holds Auger) $2.23
- Arduino Uno Rev- given
- Solenoid Valve $9.95
- Solderless Bread Board $6.95 (x2)
- TIP120 Darlington Transistor $.95
- 1k Ohm Resistor $1.00
- Diode $.15
- Hookup Wires $6.95
- Load Sensor 5 kg $9.95
- A4988 Stepper Driver $1.88
- 12V 2A Adapter $4.29
