Difference between revisions of "Networking Cars Log"

From ESE205 Wiki
Jump to navigation Jump to search
Line 5: Line 5:
 
'''Week 1: 9/4/17 - 9/10/17 ''' <br>
 
'''Week 1: 9/4/17 - 9/10/17 ''' <br>
 
- Created wiki page and log. <br>
 
- Created wiki page and log. <br>
- Changed project from building a quadcopter to focusing on creating a effective docking mechanism between two vehicles. <br>
+
- Changed project from building a quadcopter to focusing on creating an effective docking mechanism between two vehicles. <br>
 
- Came up with some potential objectives and challenges. <br>
 
- Came up with some potential objectives and challenges. <br>
  
'''Week 2: 9/11/17 - 9/17/17 '''
+
'''Week 2: 9/11/17 - 9/17/17 ''' <br>
 
+
- Researched controlling electromagnets with Arduinos, I2C communication protocols, creating an Arduino controlled battery charger, and bootlegging store bought remote controlled cars to be run using an Arduino. (Deep, 4 Hours) <br>
 +
- Contacted Prof. Zhang about using Pi Cars for this project. (Deep) <br>
 +
- Discussed ideas for designing the latch and whether or not to use actual motorized cars.
  
 
[[Category:Logs]]
 
[[Category:Logs]]
 
[[Category:Fall 2017 Logs]]
 
[[Category:Fall 2017 Logs]]

Revision as of 14:24, 17 September 2017

Weekly Log for Networking Modules

By Curtis Hoffman and Deep Jyoti

Week 1: 9/4/17 - 9/10/17
- Created wiki page and log.
- Changed project from building a quadcopter to focusing on creating an effective docking mechanism between two vehicles.
- Came up with some potential objectives and challenges.

Week 2: 9/11/17 - 9/17/17
- Researched controlling electromagnets with Arduinos, I2C communication protocols, creating an Arduino controlled battery charger, and bootlegging store bought remote controlled cars to be run using an Arduino. (Deep, 4 Hours)
- Contacted Prof. Zhang about using Pi Cars for this project. (Deep)
- Discussed ideas for designing the latch and whether or not to use actual motorized cars.