Difference between revisions of "Searching for Stability"
Jump to navigation
Jump to search
Nwschmetter (talk | contribs) |
Nwschmetter (talk | contribs) |
||
| Line 4: | Line 4: | ||
===Project Overview=== | ===Project Overview=== | ||
---- | ---- | ||
| − | Our project is to create a bike-mounted stabilizing platform for iPhone cinematography. Most stabilizing mechanisms on the market today are both bulky and pricey. | + | Our project is to create a bike-mounted stabilizing platform for iPhone cinematography. Most stabilizing mechanisms on the market today are both bulky and pricey. Using two motors, two magnetic rotary encoders, and an Arduino module, we hope to create a cost effective 2-axis gimbal. To provide additional stability, we will utilize vibration dampening pads in the mounting device itself. If successful, applications of an inexpensive, compact stabilizing device could be innumerable, from handheld usage to RC and aerial filming and photography. |
| − | + | ||
| − | |||
| − | |||
By the end of the semester we will be able to present iPhone footage from our device to illustrate the stabilizing capabilities of our design. | By the end of the semester we will be able to present iPhone footage from our device to illustrate the stabilizing capabilities of our design. | ||
| − | |||
===Project Objectives=== | ===Project Objectives=== | ||
Revision as of 23:27, 13 February 2016
Contents
Description
Project Overview
Our project is to create a bike-mounted stabilizing platform for iPhone cinematography. Most stabilizing mechanisms on the market today are both bulky and pricey. Using two motors, two magnetic rotary encoders, and an Arduino module, we hope to create a cost effective 2-axis gimbal. To provide additional stability, we will utilize vibration dampening pads in the mounting device itself. If successful, applications of an inexpensive, compact stabilizing device could be innumerable, from handheld usage to RC and aerial filming and photography.
By the end of the semester we will be able to present iPhone footage from our device to illustrate the stabilizing capabilities of our design.
Project Objectives
- Research principles and current techniques employed to achieve stability
- Design and construct a practical and functional mounting device for an iPhone on a bike
- 3D print a two-axis gimbal to regulate motion of the mounted phone
- Design and embed the gimbal and additional stability elements either onto or within the mounting platform itself
- Successfully stabilize the iPhone while recording a video from a moving bike
Project Challenges
- Identifying appropriate motors to carry out the stabilization of the platform
- Designing the mounting device and modifying gimbal design using 3D printer
- Perfecting the programming of the control board
- Finding the most effective dampening cushions considering size and weight of platform
- Compacting all elements of the design to create an unobtrusive stabilizing device\
Budget
- Parts Ordered Online
- Hardware and Miscellaneous Items ($15.00)
- Screws
- Wire
- Wire Snap Connectors
- And other unforeseen items necessary for assembly
- Finally we would like to hold $30 in reserve which will only be used if we need to purchase replacement brushless gimbal motors due to the malfunction of our original motors
Total: $147.54 (including the $30 reserve)
Gantt Chart
