Difference between revisions of "File:Frame Model.PNG"

From ESE205 Wiki
Jump to navigation Jump to search
(The .SLDPRT file for the frame. Note the holes in the bottom which were used to screw the base of the frame to the bottom stepper motor. The slots in the bridge and left-hand prong are used for cable routing.)
 
(Fordicejw uploaded a new version of File:Frame Model.PNG)
 
(No difference)

Latest revision as of 21:34, 14 December 2016

The .SLDPRT file for the frame. Note the holes in the bottom which were used to screw the base of the frame to the bottom stepper motor. The slots in the bridge and left-hand prong are used for cable routing.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current21:34, 14 December 2016Thumbnail for version as of 21:34, 14 December 2016448 × 638 (70 KB)Fordicejw (talk | contribs)The .SLDPRT file for the frame. Note the holes in the bottom which were used to screw the base of the frame to the bottom stepper motor. The slots in the bridge and left-hand prong are used for cable routing.
21:23, 14 December 2016Thumbnail for version as of 21:23, 14 December 2016448 × 638 (70 KB)Fordicejw (talk | contribs)The .SLDPRT file for the frame. Note the holes in the bottom which were used to screw the base of the frame to the bottom stepper motor. The slots in the bridge and left-hand prong are used for cable routing.

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http://classes.engineering.wustl.edu/ese205/core/index.php?title=File:Frame_Model.PNG&oldid=2359"