Difference between revisions of "Finding Feanor Log"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
Earlier this week we talked to our student TA, Will, and he helped us round out the major ideas for our project and helped us troubleshoot our ideas for the functionality of our machine. Our project proposal will be approved soon so we will start to order parts this next week. Although we will most likely not be 3D printing any parts for "Finding Feanor" the lecture this last Friday is helpful in case we decide otherwise. The project seems to be going smoothly with all group members being cooperative and working productively together and separately. | Earlier this week we talked to our student TA, Will, and he helped us round out the major ideas for our project and helped us troubleshoot our ideas for the functionality of our machine. Our project proposal will be approved soon so we will start to order parts this next week. Although we will most likely not be 3D printing any parts for "Finding Feanor" the lecture this last Friday is helpful in case we decide otherwise. The project seems to be going smoothly with all group members being cooperative and working productively together and separately. | ||
| + | |||
| + | |||
| + | ==9/30/16== | ||
| + | |||
| + | *After a meeting on Tuesday (9/27) with Will, we realized that our Gantt chart was still a bit too vague to be of much use to use during our various downtimes, such as the period in between the ordering of parts and their arrival. Will suggested that we begin designing the circuit for the phototransistors, so Zach and Sam got to work immediately. We should have a computer generated image of the circuit design on the main wiki page before next Friday (10/7). We all have a much more complete understanding of the project timeline after this week. | ||
| + | *We all feel a bit more informed after a meeting with Humberto yesterday (9/29) where we decided that our project would include a solar panel after all. We are very lucky as a) there was room in the budget and b) the Arduinos supplied by the lab each have 6 analog/digital converters which should be more than enough for our system. | ||
| + | **It was also decided at this meeting that our base and rotating frame would be 3D printed rather than made from metal/wood. We all have minimal CAD experience so designing the components may take some more time than anticipated but the magnitude of that delay is still unsure. Regardless, the Gantt chart will have to be updated to reflect this. | ||
| + | *The budget was also made more concrete than our last update. While we already had the essential components figured out, a solar panel was added along with the necessary connectors and cables for the Arduino and stepper motor driver. The total cost is now $101.98 out of a $150 budget. | ||
| + | |||
| + | *Objectives for the next week: | ||
| + | **Begin CADing the the frame/platform/mounts for the panel/phototransistor unit. | ||
| + | **Order components. (PRIORITY) | ||
| + | **Overhaul Gantt chart to reflect our lost time higher understanding of our task timeline. | ||
[[Category:Fall 2016 Logs]] | [[Category:Fall 2016 Logs]] | ||
[[Category:Logs]] | [[Category:Logs]] | ||
Revision as of 23:52, 30 September 2016
9/26/16
Earlier this week we talked to our student TA, Will, and he helped us round out the major ideas for our project and helped us troubleshoot our ideas for the functionality of our machine. Our project proposal will be approved soon so we will start to order parts this next week. Although we will most likely not be 3D printing any parts for "Finding Feanor" the lecture this last Friday is helpful in case we decide otherwise. The project seems to be going smoothly with all group members being cooperative and working productively together and separately.
9/30/16
- After a meeting on Tuesday (9/27) with Will, we realized that our Gantt chart was still a bit too vague to be of much use to use during our various downtimes, such as the period in between the ordering of parts and their arrival. Will suggested that we begin designing the circuit for the phototransistors, so Zach and Sam got to work immediately. We should have a computer generated image of the circuit design on the main wiki page before next Friday (10/7). We all have a much more complete understanding of the project timeline after this week.
- We all feel a bit more informed after a meeting with Humberto yesterday (9/29) where we decided that our project would include a solar panel after all. We are very lucky as a) there was room in the budget and b) the Arduinos supplied by the lab each have 6 analog/digital converters which should be more than enough for our system.
- It was also decided at this meeting that our base and rotating frame would be 3D printed rather than made from metal/wood. We all have minimal CAD experience so designing the components may take some more time than anticipated but the magnitude of that delay is still unsure. Regardless, the Gantt chart will have to be updated to reflect this.
- The budget was also made more concrete than our last update. While we already had the essential components figured out, a solar panel was added along with the necessary connectors and cables for the Arduino and stepper motor driver. The total cost is now $101.98 out of a $150 budget.
- Objectives for the next week:
- Begin CADing the the frame/platform/mounts for the panel/phototransistor unit.
- Order components. (PRIORITY)
- Overhaul Gantt chart to reflect our lost time higher understanding of our task timeline.
