Difference between revisions of "Searching for Stability"
Jump to navigation
Jump to search
Nwschmetter (talk | contribs) |
Natalie.ng (talk | contribs) |
||
| Line 15: | Line 15: | ||
*Design and embed the gimbal and additional stability elements either onto or within the mounting platform itself | *Design and embed the gimbal and additional stability elements either onto or within the mounting platform itself | ||
*Successfully stabilize the iPhone while recording a video from a moving bike | *Successfully stabilize the iPhone while recording a video from a moving bike | ||
| − | |||
===Project Challenges=== | ===Project Challenges=== | ||
| Line 25: | Line 24: | ||
*Finding the most effective dampening cushions considering size and weight of platform | *Finding the most effective dampening cushions considering size and weight of platform | ||
*Compacting all elements of the design to create an unobtrusive stabilizing device | *Compacting all elements of the design to create an unobtrusive stabilizing device | ||
| − | |||
==Budget== | ==Budget== | ||
Revision as of 23:41, 13 February 2016
Contents
Description
Project Overview
Our project is to create a bike-mounted stabilizing platform for iPhone cinematography. Most stabilizing mechanisms on the market today are both bulky and pricey. Using two motors, two magnetic rotary encoders, and an Arduino module, we hope to create a cost effective 2-axis gimbal. To provide additional stability, we will utilize vibration dampening pads in the mounting device itself. If successful, applications of an inexpensive, compact stabilizing device could be innumerable, from handheld usage to RC and aerial filming and photography.
By the end of the semester we will be able to present iPhone footage from our device to illustrate the stabilizing capabilities of our design.
Project Objectives
- Design and construct a practical and functional mounting device for an iPhone on a bike
- 3D print a two-axis gimbal to regulate motion of the mounted phone
- Program an Arduino module to consistently level the iPhone while in use
- Design and embed the gimbal and additional stability elements either onto or within the mounting platform itself
- Successfully stabilize the iPhone while recording a video from a moving bike
Project Challenges
- Perfecting the programming of the Arduino module in order to analyze the input from the two magnetic rotary encoders and communicate with the two brushless motors to re-level the iPhone
- Ensuring that input from the encoders is readable to the Arduino
- Identifying appropriate motors to carry out the stabilization of the platform
- Designing the mounting device and modifying gimbal design using 3D printer
- Finding the most effective dampening cushions considering size and weight of platform
- Compacting all elements of the design to create an unobtrusive stabilizing device
Budget
- Parts Ordered Online
- Hardware and Miscellaneous Items ($15.00)
- Screws
- Wire
- Wire Snap Connectors
Total: $147.54
Gantt Chart
