Difference between revisions of "File:Panel Mount Model.PNG"

From ESE205 Wiki
Jump to navigation Jump to search
(The mount which the panel and PCB were glued to. Note the prongs at the top: these were used as the mounting point for the pyramid array.)
 
 
Line 1: Line 1:
−
The mount which the panel and PCB were glued to. Note the prongs at the top: these were used as the mounting point for the pyramid array.
+
The mount which the panel and PCB were glued to. Note the prongs at the top: these were used as the mounting point for the pyramid array. The cylindrical extrusion is what allows for a swiveling interaction with the frame.

Latest revision as of 21:25, 14 December 2016

The mount which the panel and PCB were glued to. Note the prongs at the top: these were used as the mounting point for the pyramid array. The cylindrical extrusion is what allows for a swiveling interaction with the frame.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current21:24, 14 December 2016Thumbnail for version as of 21:24, 14 December 2016390 × 603 (76 KB)Fordicejw (talk | contribs)The mount which the panel and PCB were glued to. Note the prongs at the top: these were used as the mounting point for the pyramid array.

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http://classes.engineering.wustl.edu/ese205/core/index.php?title=File:Panel_Mount_Model.PNG&oldid=2348"