Difference between revisions of "BusyBear log"

Revision as of 22:49, 1 February 2019

BusyBear Log

- 01/28

Whole Group: Had a group meeting with Profesor Feher and discussed possible implications of our busybear concept. In addition, we researched similar projects and found a variety of sources. (https://www.crc.id.au/tracking-people-via-wifi-even-when-not-connected/ and https://www.raspberrypi.org/forums/viewtopic.php?t=47059) - 1 hour
Whole Group: Met with David and further went over the specifics of our project including discussing the possibility of either using wifi based or camera-based system. In addition, David provided the link to some working projects that also used Arduino as well as a tutorial (https://picar.readthedocs.io/en/latest/chapters/introduction.html) - 1 hour

-01/29

Whole Group: Looked more into proof of concepts and specific tutorial on how to track devices using wifi/Bluetooth and found a variety of in-depth albeit confusing sources. (https://makezine.com/projects/build-raspberry-pi-network-scanner/ and https://www.youtube.com/watch?time_continue=1&v=fmhjtzmLrg8 and https://zone13.io/post/wifi-monitoring-using-raspberry-pi/) - 1 hour

-01/30

Whole Group: Met to try and finalize general goals and project. We worked on our project proposal on our Wiki page. - 2 hours

-01/31

Allison: Finished up the project proposal by inserting the Gantt Chart into the Wiki page. - 30 minutes

-02/1

Thomas and Tom: Worked on the nightlight and established a successful prototype. - 30 minutes

@@ Line 14: / Line 14: @@
 -01/31
 *Allison: Finished up the project proposal by inserting the Gantt Chart into the Wiki page. - 30 minutes
+-02/1
+*Thomas and Tom: Worked on the nightlight and established a successful prototype. - 30 minutes
 [[Category:Logs]]
 [[Category:Spring 2019 Logs]]