Products: ABAQUS/Standard ABAQUS/Explicit
Elasticity
Young's modulus, E = 200.0E3
Poisson's ratio, 
= 0.3
Plasticity
Annealing temperature
100.00
In all the tests a single element is loaded in the plastic range and then unloaded. The resulting equivalent plastic strain (and shift tensor for the kinematic models) is then annealed by raising the temperature to the annealing temperature. Subsequently, the temperature is decreased below the annealing temperature, and the element is loaded again into the plastic range.
ABAQUS/Standard, C3D8 elements, isotropic hardening.
ABAQUS/Standard, CPS4 elements, isotropic hardening.
ABAQUS/Standard, T3D2 elements.
ABAQUS/Standard, C3D8 elements, combined hardening.
ABAQUS/Standard, CPS4 elements, combined hardening.
ABAQUS/Explicit, C3D8R elements.