ABAQUS Analysis User's Manual  


31.5.2 Axisymmetric rigid surface contact element library

Product: ABAQUS/Standard  

References

Element types

IRS21AAxisymmetric rigid surface contact element for use with first-order axisymmetric elements
IRS22AAxisymmetric rigid surface contact element for use with second-order axisymmetric elements

Active degrees of freedom

1, 2 at each node except the last node

1, 2, 6, the motion of the rigid body reference node, at the last node

Additional solution variables

Two additional variables at each node relating to the contact stresses.

Nodal coordinates required

r, z

Element property definition

Input File Usage:           Use the following option to define the surface with which the elements interact:
*RIGID SURFACE

Use the following option to define the rigid surface element's section properties:

*INTERFACE

Element-based loading

None.

Element output

S11

Pressure between the element and the rigid surface in the direction of the normal to the rigid surface.

S12

Shear component of the stress between the element and the rigid surface in the direction of the tangent to the rigid surface.

E11

Separation of the surfaces in the direction of the normal to the rigid surface at the closest point of the surface to the integration point on the element.

E12

Accumulated relative tangential displacement of the surfaces.

Node ordering on elements

The first two nodes in IRS21A and the first three nodes in IRS22A are on the deforming mesh. The last node is the rigid body reference node that defines the motion of the rigid body.

Numbering of integration points for output

The integration points are located at the nodes that lie on the surface of the deforming model and are numbered correspondingly.