This option is used to create a contact clearance property definition. The contact clearance properties will govern any contact interactions that are assigned these properties via the *CONTACT CLEARANCE ASSIGNMENT option.
Product: ABAQUS/Explicit
Type: Model data
Level: Model
Set this parameter equal to a label that will be used to refer to this contact clearance property.
Set ADJUST=YES (default) to resolve clearances by adjusting the nodal coordinates without creating strain in the model. ADJUST=YES can be used only for clearances defined in the first step of an analysis.
Set ADJUST=NO to store contact offsets so that the clearances can be satisfied without adjusting the nodal coordinates.
Set this parameter equal to the value of the initial clearance for the entire set of slave nodes or to the name of a nodal distribution (see “Distribution definition,” Section 2.7.1 of the ABAQUS Analysis User's Manual). The clearance values must be non-negative for slave nodes on solid element surfaces. The default value is 0.0.
Set this parameter equal to the distance above the surfaces that will be searched for slave nodes to be included in the clearance specification. The default for solid elements is approximately one-tenth of the element size of the elements attached to a slave node. The default for structural elements (e.g., shell elements) is the thickness associated with the slave node.
Set this parameter equal to the distance below the surfaces that will be searched for slave nodes to be included in the clearance specification. The default for solid elements is approximately one-tenth of the element size of the elements attached to a slave node. The default for structural elements (e.g., shell elements) is the thickness associated with the slave node.