**------------------------------------------------------------------
**
**                         ANALYSIS TYPE 
**  (change entries in this block to set up the desired analysis type)
**
*parameter
qa_length                        = 0.4
cruise_velocity                  = 5000.0
distance_per_increment_at_cruise = 25.0
length_after_bump                = 4000.0
**
**                       BUMP                   
**
**   bumps_in_phase              = -1 -> no bumps
**                               =  0 -> antiphase bumps
**                               =  1 -> in phase bumps
bumps_in_phase                   =  0
***
***
average_accel_during_accel       = 5000.0
init_vel                         = 0.1*cruise_velocity
nr_inc_accel                     = 30.0
nr_inc_const_vel_bb_accel_step   = 5.0
nr_inc_const_vel_bb_free_step    = 5.0
**
**   lanalysis_type              = 1 -> some sort of steering is done
**                               = 0 -> no steering at all
lanalysis_type                   = 0
**
**                     STEERING                
**
**   lsteer_type                 = 1 -> to the right  
**                               = 0 -> sinusoidal 
lsteer_type                      = 0
steering_amplitude               = 4.0
**
**   rack_amplitude              = 'zero' -> no steering
**                               = 'steer-right' -> steer to the right
**                               = 'sinusoidal_steering' -> sinusoidal steering
rack_amplitude                   = 'zero'
**------------------------------------------------------------------
**