*HEADING
 Transfer from Explicit to Standard
 Test for S4R element with SHELL GENERAL SECTION
 - input section stiffness matrix directly
 - shear test
*IMPORT,STEP=2,UPDATE=NO,STATE=YES
 SHELL,
*IMPORT NSET
 ALL,
*RESTART,TIMEMARKS=NO,NUM=2,WRITE
**
**
*ELSET, ELSET=QA_TEST_ALLELEMS
shell,
**
*NSET, NSET=QA_TEST_ALLNODES
all,
**
*STEP
 This is a dummy step to verify the initial stress imported from Standard
*DYNAMIC,EXPLICIT
  ,0.0001
*BOUNDARY
 ALL, ENCASTRE
*FILE OUTPUT,TIMEMARKS=YES, NUM=1
*EL FILE
STH,
SF, 
SE, 
*OUTPUT, FIELD, TIMEMARKS=YES, NUMBER INTERVAL=1
*ELEMENT OUTPUT, ELSET=QA_TEST_ALLELEMS
STH,
SF, 
SE, 
*OUTPUT,FIELD,VARIABLE=PRESELECT
*OUTPUT,HISTORY,VARIABLE=PRESELECT,TIMEINT=0.0001
***OUTPUT,HISTORY,VARIABLE=PRESELECT
*END STEP
**
*STEP
*DYNAMIC,EXPLICIT
 , 0.1
*BOUNDARY, TYPE=VELOCITY, OP=NEW
 ALL, 3,3
 ALL, 6, 6
 1, 1,2
 2, 1,2
 3, 2,2
 4, 2,2 
 3, 1, 1, 1.0
 4, 1, 1, 1.0
*FILE OUTPUT,TIMEMARKS=YES, NUM=4
*EL FILE
*NODE FILE
 U,
*OUTPUT, FIELD, TIMEMARKS=YES, NUMBER INTERVAL=4
*ELEMENT OUTPUT, ELSET=QA_TEST_ALLELEMS
*NODE OUTPUT, NSET=QA_TEST_ALLNODES
 U,
*OUTPUT,FIELD,VARIABLE=PRESELECT
*OUTPUT,HISTORY,VARIABLE=PRESELECT,TIMEINT=0.025
*END STEP