*HEADING
          TWO DIMENSIONAL HEAT TRANSFER INTERFACE  (CPE4RT)
          GAP CONDUCTANCE
          PENALTY CONTACT
**
** The temperature at the NOUT nodes, based on a 1D model is:
** NT_out=100+HFL2*R_th; R_th=L/(kA);  
** See ch. 1.7.1 of ABAQUS/Verification Manual 
**
*NODE,NSET=NALL
1,10.,0.0
2,11.0,0.0
3,11.0,.5
4,10.0,0.5
7,11.,1.0
8,10.,1.0
11,10.,-0.1
12,11.,-0.1
17,11.,-1.0
18,10.,-1.0
*NSET, NSET=SIDE3
7,8
*NSET, NSET=BOT
11,12,17,18
*NSET,NSET=QA_TEST
1,2
*NSET,NSET=NOUT
QA_TEST,
*ELEMENT,TYPE=CPE4RT,ELSET=MID
1,1,2,3,4
*ELEMENT,TYPE=CPE4RT,ELSET=TOP
2,4,3,7,8
*ELEMENT,TYPE=CPE4RT,ELSET=BOT
3,18,17,12,11
*ELSET, ELSET=TOP
1,2
*ELSET, ELSET=SOLID
1,2,3
*SOLID SECTION,ELSET=SOLID,MATERIAL=SOLMAT
*MATERIAL,NAME=SOLMAT
*CONDUCTIVITY
1., 
*SPECIFIC HEAT
46., 
*DENSITY
7850., 
*ELASTIC
1.0,0.0
*SURFACE,TYPE=ELEMENT, NAME=SURF3
MID,S1
*SURFACE,TYPE=ELEMENT, NAME=SURF4
BOT,S3
*STEP
*DYNAMIC TEMPERATURE-DISPLACEMENT, EXPLICIT
 ,300000.
*CONTACT PAIR, INTERACTION=GAP,WEIGHT=1.0,MECHANICAL CONSTRAINT=PENALTY
SURF3,SURF4
*SURFACE INTERACTION, NAME=GAP
*GAP CONDUCTANCE
10.,0.
10.,10.
*BOUNDARY,OP=NEW
SIDE3,11,,100.
BOT,11,,50.
******************************
*FILE OUTPUT, NUM=1
*NODE FILE,NSET=NOUT
 NT,
*****************************
*OUTPUT,FIELD,NUM=1
*NODE OUTPUT,NSET=QA_TEST
NT
*NODE OUTPUT,NSET=NALL
NT
********************************
***OUTPUT, HISTORY,TIME INTERV=1E4
***NODE OUTPUT, NSET=NOUT
**NT, 
***ELEMENT OUTPUT, ELSET=TOP
**HFL2,
********
*OUTPUT, HISTORY,TIME INTERV=3.0E5
*ENERGY OUTPUT,VAR=ALL
********
*ENDSTEP