*HEADING
    Test for fluid inflators.
This input deck tests the following four types of fluid inflator properties for pneumatic fluids:

1. TEMPERATURE AND MASS
2. TANK TEST
3. DUAL PRESSURE
4. PRESSURE AND MASS

All the above four inflator properties are tested with adiabatic, single cavity and dual cavity, single gas and gas mixture (Air and Nitrogen gas mixture considered) options.

The surface based fluid cavities in all the test cases are considered to be enclosed within a cubic block of fixed volume=0.125 m^3. Each face of the cubic block is modeled using single SFM3D4R element.

Effective area of 0.02 and Discharge coefficient of 0.4 is considered for dual pressure and pressure and mass type of inflator properties.

Tank volume of 0.125 m^3 is considered for tank test and dual pressure type of inflator properties.

In test case 9, the constituents of the gas mixture that inflates the cavity are considered to be different from the constituents of the gas mixture initially present in the cavity.

In test case 10, total inflation time is determined by defining amplitude function.
Results:

Inflator temperature and inflator mass flow rate are considered linear functions of time in case of 'Temperature and Mass' type of inflators. As a result, an exact solution for the cavity temperature and pressure can be derived using energy equation obtained from the first law of thermodynamics, considering heat capacities for the gases to be independent of temperature. If temperature dependence is considered, then the energy equation is solved numerically to compute cavity temperature. Both exact and numerical analytical results matches with the analysis results.

For 'Tank Test' type of inflator property, tank volume and tank pressure are considered to be the same as cavity volume and cavity pressure in case of 'Temperature and Mass' type of inflator property. The results for both 'Tank Test' and 'Temperature and Mass' type of inflator properties should be the same.
  
Results for 'Temperature and Mass' type of fluid inflator property are used to create data necessary to define 'Dual Pressure' and 'Pressure and Mass' type of fluid inflator properties. Again, the results for 'Pressure and Mass' type of fluid inflator property are the same as obtained for the 'Temperature and Mass' type of fluid inflator property. However, the results are different for 'Dual Pressure' type of fluid inflator property because of the temperature dependence of heat capacity.   
**
*PHYSICAL CONSTANTS, ABSOLUTE ZERO=-273.16, UNIVERSAL GAS CONSTANT=8.314
**#############################################################################################################
**      TEST CASE 1: ADIABATIC-One Gas(Air)-Temperature and Mass Type Inflator Property
**#############################################################################################################
*SYSTEM
0, 0, 0
*NODE, NSET=ADB_1GAS_TEMPMASS
11, 0., 0., 0.
12, 0.5, 0., 0.
13, 0.5, 0.5, 0.
14, 0., 0.5, 0.
15, 0., 0., 0.5
16, 0.5, 0., 0.5
17, 0.5, 0.5, 0.5
18, 0., 0.5, 0.5
**
** Cavity Ref. node placed at the center of the cubic cavity
**
*NODE, NSET=ADB_1GAS_TEMPMASS_REF
199, 0.25, 0.25, 0.25
**
** Elements defined such that all normals point inward
**
*ELEMENT, TYPE=SFM3D4R
11, 12, 13, 14, 11
12, 18, 17, 16, 15
13, 15, 16, 12, 11
14, 16, 17, 13, 12
15, 17, 18, 14, 13
16, 18, 15, 11, 14
**
**Element set defined to create surface for fluid cavity definition
**
*ELSET, ELSET=ADB_1GAS_TEMPMASS
11, 12, 13, 14, 15, 16
**
**Create surface to define surface based fluid cavity
**
*SURFACE, NAME=ADB_1GAS_TEMPMASS_SURF, TYPE=ELEMENT
ADB_1GAS_TEMPMASS, SPOS
**
**Fluid cavity definition
**
*FLUID CAVITY, NAME=ADB_1GAS_TEMPMASS_CAV, BEHAVIOR=AIR, REF NODE=ADB_1GAS_TEMPMASS_REF, SURFACE=ADB_1GAS_TEMPMASS_SURF, AMBIENT PRESSURE=1.0E5, ADIABATIC

**
**Inflator definition
**
*FLUID INFLATOR, NAME=ADB_1GAS_TEMPMASS_INFL, PROPERTY=TEMPMASS
199
**#############################################################################################################
**      TEST CASE 2: ADIABATIC-One Gas(Air)-Tank Test Type Inflator Property
**#############################################################################################################
*SYSTEM
0, 2, 0
*NODE, NSET=ADB_1GAS_TANK
21, 0., 0., 0.
22, 0.5, 0., 0.
23, 0.5, 0.5, 0.
24, 0., 0.5, 0.
25, 0., 0., 0.5
26, 0.5, 0., 0.5
27, 0.5, 0.5, 0.5
28, 0., 0.5, 0.5
**
** Cavity Ref. node placed at the center of the cubic cavity
**
*NODE, NSET=ADB_1GAS_TANK_REF
299, 0.25, 0.25, 0.25
**
** Elements defined such that all normals point inward
**
*ELEMENT, TYPE=SFM3D4R
21, 22, 23, 24, 21
22, 28, 27, 26, 25
23, 25, 26, 22, 21
24, 26, 27, 23, 22
25, 27, 28, 24, 23
26, 28, 25, 21, 24
**
**Element set defined to create surface for fluid cavity definition
**
*ELSET, ELSET=ADB_1GAS_TANK
21, 22, 23, 24, 25, 26
**
**Create surface to define surface based fluid cavity
**
*SURFACE, NAME=ADB_1GAS_TANK_SURF, TYPE=ELEMENT
ADB_1GAS_TANK, SPOS
**
**Fluid cavity definition
**
*FLUID CAVITY, NAME=ADB_1GAS_TANK_CAV, BEHAVIOR=AIR, REF NODE=ADB_1GAS_TANK_REF, SURFACE=ADB_1GAS_TANK_SURF, AMBIENT PRESSURE=1.0E5, ADIABATIC

**
**Inflator definition
**
*FLUID INFLATOR, NAME=ADB_1GAS_TANK_INFL, PROPERTY=TANK
299
**#############################################################################################################
**      TEST CASE 3: ADIABATIC-One Gas(Air)-Dual Pressure Type Inflator Property
**#############################################################################################################
*SYSTEM
0, 4, 0
*NODE, NSET=ADB_1GAS_DUALPR
31, 0., 0., 0.
32, 0.5, 0., 0.
33, 0.5, 0.5, 0.
34, 0., 0.5, 0.
35, 0., 0., 0.5
36, 0.5, 0., 0.5
37, 0.5, 0.5, 0.5
38, 0., 0.5, 0.5
**
** Cavity Ref. node placed at the center of the cubic cavity
**
*NODE, NSET=ADB_1GAS_DUALPR_REF
399, 0.25, 0.25, 0.25
**
** Elements defined such that all normals point inward
**
*ELEMENT, TYPE=SFM3D4R
31, 32, 33, 34, 31
32, 38, 37, 36, 35
33, 35, 36, 32, 31
34, 36, 37, 33, 32
35, 37, 38, 34, 33
36, 38, 35, 31, 34
**
**Element set defined to create surface for fluid cavity definition
**
*ELSET, ELSET=ADB_1GAS_DUALPR
31, 32, 33, 34, 35, 36
**
**Create surface to define surface based fluid cavity
**
*SURFACE, NAME=ADB_1GAS_DUALPR_SURF, TYPE=ELEMENT
ADB_1GAS_DUALPR, SPOS
**
**Fluid cavity definition
**
*FLUID CAVITY, NAME=ADB_1GAS_DUALPR_CAV, BEHAVIOR=AIR, REF NODE=ADB_1GAS_DUALPR_REF, SURFACE=ADB_1GAS_DUALPR_SURF, AMBIENT PRESSURE=1.0E5, ADIABATIC

**
**Inflator definition
**
*FLUID INFLATOR, NAME=ADB_1GAS_DUALPR_INFL, PROPERTY=DUALPR
399
**#############################################################################################################
**      TEST CASE 4: ADIABATIC-One Gas(Air)-Pressure and Mass Type Inflator Property
**#############################################################################################################
*SYSTEM
0, 6, 0
*NODE, NSET=ADB_1GAS_PRMASS
41, 0., 0., 0.
42, 0.5, 0., 0.
43, 0.5, 0.5, 0.
44, 0., 0.5, 0.
45, 0., 0., 0.5
46, 0.5, 0., 0.5
47, 0.5, 0.5, 0.5
48, 0., 0.5, 0.5
**
** Cavity Ref. node placed at the center of the cubic cavity
**
*NODE, NSET=ADB_1GAS_PRMASS_REF
499, 0.25, 0.25, 0.25
**
** Elements defined such that all normals point inward
**
*ELEMENT, TYPE=SFM3D4R
41, 42, 43, 44, 41
42, 48, 47, 46, 45
43, 45, 46, 42, 41
44, 46, 47, 43, 42
45, 47, 48, 44, 43
46, 48, 45, 41, 44
**
**Element set defined to create surface for fluid cavity definition
**
*ELSET, ELSET=ADB_1GAS_PRMASS
41, 42, 43, 44, 45, 46
**
**Create surface to define surface based fluid cavity
**
*SURFACE, NAME=ADB_1GAS_PRMASS_SURF, TYPE=ELEMENT
ADB_1GAS_PRMASS, SPOS
**
**Fluid cavity definition
**
*FLUID CAVITY, NAME=ADB_1GAS_PRMASS_CAV, BEHAVIOR=AIR, REF NODE=ADB_1GAS_PRMASS_REF, SURFACE=ADB_1GAS_PRMASS_SURF, AMBIENT PRESSURE=1.0E5, ADIABATIC

**
**Inflator definition
**
*FLUID INFLATOR, NAME=ADB_1GAS_PRMASS_INFL, PROPERTY=PRMASS
499
**#############################################################################################################
**      TEST CASE 5: ADIABATIC-Mixture(Air + Nitrogen)-Temperature and Mass Type Inflator Property
**#############################################################################################################
*SYSTEM
2, 0, 0
*NODE, NSET=ADB_MIX_TEMPMASS
51, 0., 0., 0.
52, 0.5, 0., 0.
53, 0.5, 0.5, 0.
54, 0., 0.5, 0.
55, 0., 0., 0.5
56, 0.5, 0., 0.5
57, 0.5, 0.5, 0.5
58, 0., 0.5, 0.5
**
** Cavity Ref. node placed at the center of the cubic cavity
**
*NODE, NSET=ADB_MIX_TEMPMASS_REF
599, 0.25, 0.25, 0.25
**
** Elements defined such that all normals point inward
**
*ELEMENT, TYPE=SFM3D4R
51, 52, 53, 54, 51
52, 58, 57, 56, 55
53, 55, 56, 52, 51
54, 56, 57, 53, 52
55, 57, 58, 54, 53
56, 58, 55, 51, 54
**
**Element set defined to create surface for fluid cavity definition
**
*ELSET, ELSET=ADB_MIX_TEMPMASS
51, 52, 53, 54, 55, 56
**
**Create surface to define surface based fluid cavity
**
*SURFACE, NAME=ADB_MIX_TEMPMASS_SURF, TYPE=ELEMENT
ADB_MIX_TEMPMASS, SPOS
**
**Fluid cavity definition
**
*FLUID CAVITY, NAME=ADB_MIX_TEMPMASS_CAV, MIXTURE, REF NODE=ADB_MIX_TEMPMASS_REF, SURFACE=ADB_MIX_TEMPMASS_SURF, AMBIENT PRESSURE=1.0E5, ADIABATIC

AIR, 0.6
NITROGEN, 0.4
**
**Inflator definition
**
*FLUID INFLATOR, NAME=ADB_MIX_TEMPMASS_INFL, PROPERTY=TEMPMASS_MIX
599
**#############################################################################################################
**      TEST CASE 6: ADIABATIC-Mixture(Air + Nitrogen)-Tank Test Type Inflator Property
**#############################################################################################################
*SYSTEM
2, 2, 0
*NODE, NSET=ADB_MIX_TANK
61, 0., 0., 0.
62, 0.5, 0., 0.
63, 0.5, 0.5, 0.
64, 0., 0.5, 0.
65, 0., 0., 0.5
66, 0.5, 0., 0.5
67, 0.5, 0.5, 0.5
68, 0., 0.5, 0.5
**
** Cavity Ref. node placed at the center of the cubic cavity
**
*NODE, NSET=ADB_MIX_TANK_REF
699, 0.25, 0.25, 0.25
**
** Elements defined such that all normals point inward
**
*ELEMENT, TYPE=SFM3D4R
61, 62, 63, 64, 61
62, 68, 67, 66, 65
63, 65, 66, 62, 61
64, 66, 67, 63, 62
65, 67, 68, 64, 63
66, 68, 65, 61, 64
**
**Element set defined to create surface for fluid cavity definition
**
*ELSET, ELSET=ADB_MIX_TANK
61, 62, 63, 64, 65, 66
**
**Create surface to define surface based fluid cavity
**
*SURFACE, NAME=ADB_MIX_TANK_SURF, TYPE=ELEMENT
ADB_MIX_TANK, SPOS
**
**Fluid cavity definition
**
*FLUID CAVITY, NAME=ADB_MIX_TANK_CAV, MIXTURE, REF NODE=ADB_MIX_TANK_REF, SURFACE=ADB_MIX_TANK_SURF, AMBIENT PRESSURE=1.0E5, ADIABATIC

AIR, 0.6
NITROGEN, 0.4
**
**Inflator definition
**
*FLUID INFLATOR, NAME=ADB_MIX_TANK_INFL, PROPERTY=TANK_MIX
699
**#############################################################################################################
**      TEST CASE 7: ADIABATIC-Mixture(Air + Nitrogen)-Dual Pressure Type Inflator Property
**#############################################################################################################
*SYSTEM
2, 4, 0
*NODE, NSET=ADB_MIX_DUALPR
71, 0., 0., 0.
72, 0.5, 0., 0.
73, 0.5, 0.5, 0.
74, 0., 0.5, 0.
75, 0., 0., 0.5
76, 0.5, 0., 0.5
77, 0.5, 0.5, 0.5
78, 0., 0.5, 0.5
**
** Cavity Ref. node placed at the center of the cubic cavity
**
*NODE, NSET=ADB_MIX_DUALPR_REF
799, 0.25, 0.25, 0.25
**
** Elements defined such that all normals point inward
**
*ELEMENT, TYPE=SFM3D4R
71, 72, 73, 74, 71
72, 78, 77, 76, 75
73, 75, 76, 72, 71
74, 76, 77, 73, 72
75, 77, 78, 74, 73
76, 78, 75, 71, 74
**
**Element set defined to create surface for fluid cavity definition
**
*ELSET, ELSET=ADB_MIX_DUALPR
71, 72, 73, 74, 75, 76
**
**Create surface to define surface based fluid cavity
**
*SURFACE, NAME=ADB_MIX_DUALPR_SURF, TYPE=ELEMENT
ADB_MIX_DUALPR, SPOS
**
**Fluid cavity definition
**
*FLUID CAVITY, NAME=ADB_MIX_DUALPR_CAV, MIXTURE, REF NODE=ADB_MIX_DUALPR_REF, SURFACE=ADB_MIX_DUALPR_SURF, AMBIENT PRESSURE=1.0E5, ADIABATIC

AIR, 0.6
NITROGEN, 0.4
**
**Inflator definition
**
*FLUID INFLATOR, NAME=ADB_MIX_DUALPR_INFL, PROPERTY=DUALPR_MIX
799
**#############################################################################################################
**      TEST CASE 8: ADIABATIC-Mixture(Air + Nitrogen)-Pressure and Mass Type Inflator Property
**#############################################################################################################
*SYSTEM
2, 6, 0
*NODE, NSET=ADB_MIX_PRMASS
81, 0., 0., 0.
82, 0.5, 0., 0.
83, 0.5, 0.5, 0.
84, 0., 0.5, 0.
85, 0., 0., 0.5
86, 0.5, 0., 0.5
87, 0.5, 0.5, 0.5
88, 0., 0.5, 0.5
**
** Cavity Ref. node placed at the center of the cubic cavity
**
*NODE, NSET=ADB_MIX_PRMASS_REF
899, 0.25, 0.25, 0.25
**
** Elements defined such that all normals point inward
**
*ELEMENT, TYPE=SFM3D4R
81, 82, 83, 84, 81
82, 88, 87, 86, 85
83, 85, 86, 82, 81
84, 86, 87, 83, 82
85, 87, 88, 84, 83
86, 88, 85, 81, 84
**
**Element set defined to create surface for fluid cavity definition
**
*ELSET, ELSET=ADB_MIX_PRMASS
81, 82, 83, 84, 85, 86
**
**Create surface to define surface based fluid cavity
**
*SURFACE, NAME=ADB_MIX_PRMASS_SURF, TYPE=ELEMENT
ADB_MIX_PRMASS, SPOS
**
**Fluid cavity definition
**
*FLUID CAVITY, NAME=ADB_MIX_PRMASS_CAV, MIXTURE, REF NODE=ADB_MIX_PRMASS_REF, SURFACE=ADB_MIX_PRMASS_SURF, AMBIENT PRESSURE=1.0E5, ADIABATIC

AIR, 0.6
NITROGEN, 0.4
**
**Inflator definition
**
*FLUID INFLATOR, NAME=ADB_MIX_PRMASS_INFL, PROPERTY=PRMASS_MIX
899
**################################################################################################################################################
** TEST CASE 9: ADIABATIC-Mixture(Initial:Air+Nitrogen, Final:Air+Nitrogen+Carbon dioxide+Water vapor)-Temperature and Mass Type Inflator Property
**################################################################################################################################################
*SYSTEM
4, 0, 0
*NODE, NSET=ADB_4GAS_TEMPMASS
91, 0., 0., 0.
92, 0.5, 0., 0.
93, 0.5, 0.5, 0.
94, 0., 0.5, 0.
95, 0., 0., 0.5
96, 0.5, 0., 0.5
97, 0.5, 0.5, 0.5
98, 0., 0.5, 0.5
**
** Cavity Ref. node placed at the center of the cubic cavity
**
*NODE, NSET=ADB_4GAS_TEMPMASS_REF
999, 0.25, 0.25, 0.25
**
** Elements defined such that all normals point inward
**
*ELEMENT, TYPE=SFM3D4R
91, 92, 93, 94, 91
92, 98, 97, 96, 95
93, 95, 96, 92, 91
94, 96, 97, 93, 92
95, 97, 98, 94, 93
96, 98, 95, 91, 94
**
**Element set defined to create surface for fluid cavity definition
**
*ELSET, ELSET=ADB_4GAS_TEMPMASS
91, 92, 93, 94, 95, 96
**
**Create surface to define surface based fluid cavity
**
*SURFACE, NAME=ADB_4GAS_TEMPMASS_SURF, TYPE=ELEMENT
ADB_4GAS_TEMPMASS, SPOS
**
**Fluid cavity definition
**
*FLUID CAVITY, NAME=ADB_4GAS_TEMPMASS_CAV, MIXTURE, REF NODE=ADB_4GAS_TEMPMASS_REF, SURFACE=ADB_4GAS_TEMPMASS_SURF, AMBIENT PRESSURE=1.0E5, ADIABATIC

AIR, 0.6
NITROGEN, 0.4
CARBON DIOXIDE, 0.0
WATER VAPOR, 0.0
**
**Inflator definition
**
*FLUID INFLATOR, NAME=ADB_4GAS_TEMPMASS_INFL, PROPERTY=TEMPMASS_4GAS
999
**################################################################################################################################################
** TEST CASE 10: ADIABATIC-Mixture(Air + Nitrogen)-Temperature and Mass Type Inflator Property; AMPLITUDE definition used to determine infl time.
**################################################################################################################################################
*SYSTEM
4, 2, 0
*NODE, NSET=ADB_MIX_TEMPMASS_INFLTIME
101, 0., 0., 0.
102, 0.5, 0., 0.
103, 0.5, 0.5, 0.
104, 0., 0.5, 0.
105, 0., 0., 0.5
106, 0.5, 0., 0.5
107, 0.5, 0.5, 0.5
108, 0., 0.5, 0.5
**
** Cavity Ref. node placed at the center of the cubic cavity
**
*NODE, NSET=ADB_MIX_TEMPMASS_INFLTIME_REF
1099, 0.25, 0.25, 0.25
**
** Elements defined such that all normals point inward
**
*ELEMENT, TYPE=SFM3D4R
101, 102, 103, 104, 101
102, 108, 107, 106, 105
103, 105, 106, 102, 101
104, 106, 107, 103, 102
105, 107, 108, 104, 103
106, 108, 105, 101, 104
**
**Element set defined to create surface for fluid cavity definition
**
*ELSET, ELSET=ADB_MIX_TEMPMASS_INFLTIME
101, 102, 103, 104, 105, 106
**
**Create surface to define surface based fluid cavity
**
*SURFACE, NAME=ADB_MIX_TEMPMASS_INFLTIME_SURF, TYPE=ELEMENT
ADB_MIX_TEMPMASS_INFLTIME, SPOS
**
**Fluid cavity definition
**
*FLUID CAVITY, NAME=ADB_MIX_TEMPMASS_INFLTIME_CAV, MIXTURE, REF NODE=ADB_MIX_TEMPMASS_INFLTIME_REF, SURFACE=ADB_MIX_TEMPMASS_INFLTIME_SURF, AMBIENT PRESSURE=1.0E5, ADIABATIC

AIR, 0.6
NITROGEN, 0.4
**
**Inflator definition
**
*FLUID INFLATOR, NAME=ADB_MIX_TEMPMASS_INFLTIME_INFL, PROPERTY=TEMPMASS_MIX_INFLTIME
1099
**
**Element set for section assignment
**
*ELSET, ELSET=ELALL
ADB_1GAS_TEMPMASS
ADB_1GAS_TANK
ADB_1GAS_DUALPR
ADB_1GAS_PRMASS
ADB_MIX_TEMPMASS
ADB_MIX_TANK
ADB_MIX_DUALPR
ADB_MIX_PRMASS
ADB_4GAS_TEMPMASS
ADB_MIX_TEMPMASS_INFLTIME
**
**Node set for BC's
**
*NSET, NSET=NALL
ADB_1GAS_TEMPMASS
ADB_1GAS_TANK
ADB_1GAS_DUALPR
ADB_1GAS_PRMASS
ADB_MIX_TEMPMASS
ADB_MIX_TANK
ADB_MIX_DUALPR
ADB_MIX_PRMASS
ADB_4GAS_TEMPMASS
ADB_MIX_TEMPMASS_INFLTIME
**
**Section assignment
**
*SURFACE SECTION, ELSET=ELALL
**
**Node sets for output
**
*NSET, NSET=qa_testREF_NODES
ADB_1GAS_TEMPMASS_REF
ADB_1GAS_TANK_REF
ADB_1GAS_DUALPR_REF
ADB_1GAS_PRMASS_REF
ADB_MIX_TEMPMASS_REF
ADB_MIX_TANK_REF
ADB_MIX_DUALPR_REF
ADB_MIX_PRMASS_REF
ADB_4GAS_TEMPMASS_REF
ADB_MIX_TEMPMASS_INFLTIME_REF
**
**Initial conditions
**
*INITIAL CONDITIONS, TYPE=TEMPERATURE
qa_testREF_NODES, 200
**
**Boundary conditions
**
*BOUNDARY
NALL, 1, 3
**
**Fluid behavior definition
**
*FLUID BEHAVIOR, NAME=AIR
*MOLECULAR WEIGHT
0.0289
*CAPACITY, TYPE=POLYNOMIAL
28.110, 1.967E-3, 4.802E-6, -1.966E-9, 0.0
*FLUID BEHAVIOR, NAME=NITROGEN
*MOLECULAR WEIGHT
0.028
*CAPACITY, TYPE=POLYNOMIAL
26.092, 8.218E-3, -1.976E-6, -0.1592E-9, 0.0444E6
*FLUID BEHAVIOR, NAME=CARBON DIOXIDE
*MOLECULAR WEIGHT
0.044
*CAPACITY, TYPE=POLYNOMIAL
24.997, 55.186E-3, -33.691E-6, 7.948E-9, -0.136E6
*FLUID BEHAVIOR, NAME=WATER VAPOR
*MOLECULAR WEIGHT
0.018
*CAPACITY, TYPE=POLYNOMIAL
32.240, 1.923E-3, 0.105E-6, -3.595E-9, 0
**
**Inflator property definition
**
*FLUID INFLATOR PROPERTY, NAME=TEMPMASS, TYPE=TEMPERATURE AND MASS
  0.00, 200.000,  0.000
  0.25, 250.000,  0.500
  0.50, 300.000,  1.000
  0.75, 350.000,  1.500
  1.00, 400.000,  2.000
*FLUID INFLATOR MIXTURE, NUMBER SPECIES=1
AIR
0, 1
*FLUID INFLATOR PROPERTY, NAME=TANK, TYPE=TANK TEST, TANK VOLUME=0.125
  0.00, 200.000,  0.000
  0.01, 202.000, 155.066
  0.02, 204.000, 622.006
  0.03, 206.000, 1403.434
  0.04, 208.000, 2501.966
  0.05, 210.000, 3920.216
  0.06, 212.000, 5660.797
  0.07, 214.000, 7726.325
  0.08, 216.000, 10119.413
  0.09, 218.000, 12842.677
  0.10, 220.000, 15898.731
  0.11, 222.000, 19290.189
  0.12, 224.000, 23019.665
  0.13, 226.000, 27089.774
  0.14, 228.000, 31503.130
  0.15, 230.000, 36262.348
  0.16, 232.000, 41370.043
  0.17, 234.000, 46828.828
  0.18, 236.000, 52641.318
  0.19, 238.000, 58810.128
  0.20, 240.000, 65337.871
  0.21, 242.000, 72227.163
  0.22, 244.000, 79480.617
  0.23, 246.000, 87100.849
  0.24, 248.000, 95090.472
  0.25, 250.000, 103452.101
  0.26, 252.000, 112188.351
  0.27, 254.000, 121301.835
  0.28, 256.000, 130795.169
  0.29, 258.000, 140670.966
  0.30, 260.000, 150931.841
  0.31, 262.000, 161580.409
  0.32, 264.000, 172619.284
  0.33, 266.000, 184051.081
  0.34, 268.000, 195878.413
  0.35, 270.000, 208103.895
  0.36, 272.000, 220730.142
  0.37, 274.000, 233759.767
  0.38, 276.000, 247195.387
  0.39, 278.000, 261039.614
  0.40, 280.000, 275295.064
  0.41, 282.000, 289964.350
  0.42, 284.000, 305050.087
  0.43, 286.000, 320554.890
  0.44, 288.000, 336481.373
  0.45, 290.000, 352832.151
  0.46, 292.000, 369609.837
  0.47, 294.000, 386817.046
  0.48, 296.000, 404456.393
  0.49, 298.000, 422530.493
  0.50, 300.000, 441041.958
  0.51, 302.000, 459993.405
  0.52, 304.000, 479387.447
  0.53, 306.000, 499226.699
  0.54, 308.000, 519513.775
  0.55, 310.000, 540251.290
  0.56, 312.000, 561441.857
  0.57, 314.000, 583088.092
  0.58, 316.000, 605192.610
  0.59, 318.000, 627758.023
  0.60, 320.000, 650786.947
  0.61, 322.000, 674281.996
  0.62, 324.000, 698245.785
  0.63, 326.000, 722680.928
  0.64, 328.000, 747590.039
  0.65, 330.000, 772975.733
  0.66, 332.000, 798840.624
  0.67, 334.000, 825187.327
  0.68, 336.000, 852018.457
  0.69, 338.000, 879336.626
  0.70, 340.000, 907144.451
  0.71, 342.000, 935444.545
  0.72, 344.000, 964239.522
  0.73, 346.000, 993531.998
  0.74, 348.000, 1023324.587
  0.75, 350.000, 1053619.902
  0.76, 352.000, 1084420.559
  0.77, 354.000, 1115729.172
  0.78, 356.000, 1147548.356
  0.79, 358.000, 1179880.724
  0.80, 360.000, 1212728.891
  0.81, 362.000, 1246095.471
  0.82, 364.000, 1279983.080
  0.83, 366.000, 1314394.331
  0.84, 368.000, 1349331.839
  0.85, 370.000, 1384798.218
  0.86, 372.000, 1420796.083
  0.87, 374.000, 1457328.048
  0.88, 376.000, 1494396.728
  0.89, 378.000, 1532004.736
  0.90, 380.000, 1570154.688
  0.91, 382.000, 1608849.198
  0.92, 384.000, 1648090.880
  0.93, 386.000, 1687882.348
  0.94, 388.000, 1728226.218
  0.95, 390.000, 1769125.103
  0.96, 392.000, 1810581.617
  0.97, 394.000, 1852598.377
  0.98, 396.000, 1895177.995
  0.99, 398.000, 1938323.086
  1.00, 400.000, 1982036.264
*FLUID INFLATOR MIXTURE, NUMBER SPECIES=1
AIR
0, 1
*FLUID INFLATOR PROPERTY, NAME=DUALPR, TYPE=DUAL PRESSURE, TANK VOLUME=0.125, EFFECTIVE AREA=0.02, DISCHARGE COEFFICIENT=0.4
  0.00, -99000.000,  0.000
  0.01, -98656.696, 155.066
  0.02, -97307.744, 622.006
  0.03, -95953.162, 1403.434
  0.04, -94592.966, 2501.966
  0.05, -93227.175, 3920.216
  0.06, -91855.807, 5660.797
  0.07, -90478.877, 7726.325
  0.08, -89096.403, 10119.413
  0.09, -87708.402, 12842.677
  0.10, -86314.891, 15898.731
  0.11, -84915.886, 19290.189
  0.12, -83511.404, 23019.665
  0.13, -82101.461, 27089.774
  0.14, -80686.074, 31503.130
  0.15, -79265.257, 36262.348
  0.16, -77839.028, 41370.043
  0.17, -76407.403, 46828.828
  0.18, -74970.396, 52641.318
  0.19, -73528.024, 58810.128
  0.20, -72080.301, 65337.871
  0.21, -70627.244, 72227.163
  0.22, -69168.867, 79480.617
  0.23, -67705.186, 87100.849
  0.24, -66236.216, 95090.472
  0.25, -64761.971, 103452.101
  0.26, -63282.466, 112188.351
  0.27, -61797.716, 121301.835
  0.28, -60307.736, 130795.169
  0.29, -58812.540, 140670.966
  0.30, -57312.141, 150931.841
  0.31, -55806.556, 161580.409
  0.32, -54295.796, 172619.284
  0.33, -52779.878, 184051.081
  0.34, -51258.814, 195878.413
  0.35, -49732.618, 208103.895
  0.36, -48201.304, 220730.142
  0.37, -46664.886, 233759.767
  0.38, -45123.377, 247195.387
  0.39, -43576.790, 261039.614
  0.40, -42025.140, 275295.064
  0.41, -40468.438, 289964.350
  0.42, -38906.699, 305050.087
  0.43, -37339.935, 320554.890
  0.44, -35768.160, 336481.373
  0.45, -34191.385, 352832.151
  0.46, -32609.625, 369609.837
  0.47, -31022.891, 386817.046
  0.48, -29431.196, 404456.393
  0.49, -27834.553, 422530.493
  0.50, -26232.974, 441041.958
  0.51, -24626.471, 459993.405
  0.52, -23015.057, 479387.447
  0.53, -21398.744, 499226.699
  0.54, -19777.544, 519513.775
  0.55, -18151.469, 540251.290
  0.56, -16520.531, 561441.857
  0.57, -14884.742, 583088.092
  0.58, -13244.113, 605192.610
  0.59, -11598.656, 627758.023
  0.60, -9948.383, 650786.947
  0.61, -8293.306, 674281.996
  0.62, -6633.435, 698245.785
  0.63, -4968.783, 722680.928
  0.64, -3299.360, 747590.039
  0.65, -1625.178, 772975.733
  0.66, 53.752, 798840.624
  0.67, 1737.419, 825187.327
  0.68, 3425.812, 852018.457
  0.69, 5118.919, 879336.626
  0.70, 6816.731, 907144.451
  0.71, 8519.236, 935444.545
  0.72, 10226.424, 964239.522
  0.73, 11938.283, 993531.998
  0.74, 13654.804, 1023324.587
  0.75, 15375.975, 1053619.902
  0.76, 17101.786, 1084420.559
  0.77, 18832.227, 1115729.172
  0.78, 20567.287, 1147548.356
  0.79, 22306.957, 1179880.724
  0.80, 24051.225, 1212728.891
  0.81, 25800.082, 1246095.471
  0.82, 27553.518, 1279983.080
  0.83, 29311.522, 1314394.331
  0.84, 31074.084, 1349331.839
  0.85, 32841.195, 1384798.218
  0.86, 34612.845, 1420796.083
  0.87, 36389.024, 1457328.048
  0.88, 38169.722, 1494396.728
  0.89, 39954.929, 1532004.736
  0.90, 41744.637, 1570154.688
  0.91, 43538.834, 1608849.198
  0.92, 45337.513, 1648090.880
  0.93, 47140.662, 1687882.348
  0.94, 48948.274, 1728226.218
  0.95, 50760.338, 1769125.103
  0.96, 52576.845, 1810581.617
  0.97, 54397.787, 1852598.377
  0.98, 56223.153, 1895177.995
  0.99, 58052.934, 1938323.086
  1.00, 59887.122, 1982036.264
*FLUID INFLATOR MIXTURE, NUMBER SPECIES=1
AIR
0, 1
*FLUID INFLATOR PROPERTY, NAME=PRMASS, TYPE=PRESSURE AND MASS, EFFECTIVE AREA=0.02, DISCHARGE COEFFICIENT=0.4
  0.01, -98645.082,  0.020
  0.02, -97284.427,  0.040
  0.03, -95918.013,  0.060
  0.04, -94545.818,  0.080
  0.05, -93167.820,  0.100
  0.06, -91783.997,  0.120
  0.07, -90394.332,  0.140
  0.08, -88998.808,  0.160
  0.09, -87597.412,  0.180
  0.10, -86190.135,  0.200
  0.11, -84776.973,  0.220
  0.12, -83357.922,  0.240
  0.13, -81932.986,  0.260
  0.14, -80502.169,  0.280
  0.15, -79065.481,  0.300
  0.16, -77622.933,  0.320
  0.17, -76174.541,  0.340
  0.18, -74720.323,  0.360
  0.19, -73260.297,  0.380
  0.20, -71794.485,  0.400
  0.21, -70322.909,  0.420
  0.22, -68845.593,  0.440
  0.23, -67362.562,  0.460
  0.24, -65873.840,  0.480
  0.25, -64379.452,  0.500
  0.26, -62879.424,  0.520
  0.27, -61373.782,  0.540
  0.28, -59862.549,  0.560
  0.29, -58345.750,  0.580
  0.30, -56823.412,  0.600
  0.31, -55295.556,  0.620
  0.32, -53762.206,  0.640
  0.33, -52223.386,  0.660
  0.34, -50679.117,  0.680
  0.35, -49129.420,  0.700
  0.36, -47574.317,  0.720
  0.37, -46013.828,  0.740
  0.38, -44447.973,  0.760
  0.39, -42876.773,  0.780
  0.40, -41300.245,  0.800
  0.41, -39718.407,  0.820
  0.42, -38131.278,  0.840
  0.43, -36538.874,  0.860
  0.44, -34941.213,  0.880
  0.45, -33338.310,  0.900
  0.46, -31730.184,  0.920
  0.47, -30116.848,  0.940
  0.48, -28498.320,  0.960
  0.49, -26874.612,  0.980
  0.50, -25245.740,  1.000
  0.51, -23611.720,  1.020
  0.52, -21972.563,  1.040
  0.53, -20328.286,  1.060
  0.54, -18678.899,  1.080
  0.55, -17024.420,  1.100
  0.56, -15364.858,  1.120
  0.57, -13700.228,  1.140
  0.58, -12030.543,  1.160
  0.59, -10355.814,  1.180
  0.60, -8676.056,  1.200
  0.61, -6991.278,  1.220
  0.62, -5301.494,  1.240
  0.63, -3606.714,  1.260
  0.64, -1906.954,  1.280
  0.65, -202.223,  1.300
  0.66, 1507.470,  1.320
  0.67, 3222.109,  1.340
  0.68, 4941.685,  1.360
  0.69, 6666.187,  1.380
  0.70, 8395.602,  1.400
  0.71, 10129.922,  1.420
  0.72, 11869.136,  1.440
  0.73, 13613.231,  1.460
  0.74, 15362.196,  1.480
  0.75, 17116.023,  1.500
  0.76, 18874.700,  1.520
  0.77, 20638.218,  1.540
  0.78, 22406.565,  1.560
  0.79, 24179.731,  1.580
  0.80, 25957.707,  1.600
  0.81, 27740.482,  1.620
  0.82, 29528.046,  1.640
  0.83, 31320.390,  1.660
  0.84, 33117.503,  1.680
  0.85, 34919.375,  1.700
  0.86, 36725.998,  1.720
  0.87, 38537.363,  1.740
  0.88, 40353.455,  1.760
  0.89, 42174.272,  1.780
  0.90, 43999.798,  1.800
  0.91, 45830.028,  1.820
  0.92, 47664.947,  1.840
  0.93, 49504.556,  1.860
  0.94, 51348.838,  1.880
  0.95, 53197.784,  1.900
  0.96, 55051.389,  1.920
  0.97, 56909.642,  1.940
  0.98, 58772.530,  1.960
  0.99, 60640.049,  1.980
  1.00, 62512.186,  2.000
*FLUID INFLATOR MIXTURE, NUMBER SPECIES=1
AIR
0, 1
*FLUID INFLATOR PROPERTY, NAME=TEMPMASS_MIX, TYPE=TEMPERATURE AND MASS
  0.00, 200.000,  0.000
  0.25, 250.000,  0.500
  0.50, 300.000,  1.000
  0.75, 350.000,  1.500
  1.00, 400.000,  2.000
*FLUID INFLATOR MIXTURE, NUMBER SPECIES=2
AIR, NITROGEN
0, 0.4, 0.6
*FLUID INFLATOR PROPERTY, NAME=TANK_MIX, TYPE=TANK TEST, TANK VOLUME=0.125
  0.00, 200.000,  0.000
  0.01, 202.000, 158.706
  0.02, 204.000, 636.201
  0.03, 206.000, 1434.789
  0.04, 208.000, 2557.078
  0.05, 210.000, 4005.943
  0.06, 212.000, 5784.450
  0.07, 214.000, 7895.755
  0.08, 216.000, 10342.965
  0.09, 218.000, 13128.971
  0.10, 220.000, 16256.245
  0.11, 222.000, 19727.720
  0.12, 224.000, 23546.542
  0.13, 226.000, 27715.345
  0.14, 228.000, 32237.051
  0.15, 230.000, 37114.758
  0.16, 232.000, 42351.640
  0.17, 234.000, 47950.855
  0.18, 236.000, 53915.462
  0.19, 238.000, 60248.348
  0.20, 240.000, 66952.163
  0.21, 242.000, 74029.608
  0.22, 244.000, 81483.865
  0.23, 246.000, 89318.008
  0.24, 248.000, 97534.990
  0.25, 250.000, 106137.666
  0.26, 252.000, 115128.819
  0.27, 254.000, 124511.196
  0.28, 256.000, 134287.569
  0.29, 258.000, 144460.789
  0.30, 260.000, 155033.865
  0.31, 262.000, 166009.623
  0.32, 264.000, 177390.801
  0.33, 266.000, 189180.336
  0.34, 268.000, 201381.053
  0.35, 270.000, 213995.693
  0.36, 272.000, 227026.952
  0.37, 274.000, 240477.510
  0.38, 276.000, 254350.082
  0.39, 278.000, 268647.454
  0.40, 280.000, 283372.537
  0.41, 282.000, 298528.125
  0.42, 284.000, 314116.876
  0.43, 286.000, 330141.578
  0.44, 288.000, 346604.976
  0.45, 290.000, 363509.786
  0.46, 292.000, 380858.709
  0.47, 294.000, 398654.446
  0.48, 296.000, 416899.711
  0.49, 298.000, 435597.247
  0.50, 300.000, 454749.844
  0.51, 302.000, 474360.248
  0.52, 304.000, 494431.139
  0.53, 306.000, 514965.240
  0.54, 308.000, 535965.268
  0.55, 310.000, 557433.932
  0.56, 312.000, 579373.944
  0.57, 314.000, 601788.015
  0.58, 316.000, 624678.862
  0.59, 318.000, 648049.208
  0.60, 320.000, 671901.785
  0.61, 322.000, 696239.317
  0.62, 324.000, 721064.503
  0.63, 326.000, 746380.046
  0.64, 328.000, 772188.653
  0.65, 330.000, 798493.035
  0.66, 332.000, 825295.905
  0.67, 334.000, 852599.980
  0.68, 336.000, 880407.974
  0.69, 338.000, 908722.605
  0.70, 340.000, 937546.583
  0.71, 342.000, 966882.625
  0.72, 344.000, 996733.438
  0.73, 346.000, 1027101.721
  0.74, 348.000, 1057990.181
  0.75, 350.000, 1089401.529
  0.76, 352.000, 1121338.480
  0.77, 354.000, 1153803.749
  0.78, 356.000, 1186800.053
  0.79, 358.000, 1220330.103
  0.80, 360.000, 1254396.608
  0.81, 362.000, 1289002.280
  0.82, 364.000, 1324149.829
  0.83, 366.000, 1359841.959
  0.84, 368.000, 1396081.375
  0.85, 370.000, 1432870.790
  0.86, 372.000, 1470212.919
  0.87, 374.000, 1508110.477
  0.88, 376.000, 1546566.181
  0.89, 378.000, 1585582.740
  0.90, 380.000, 1625162.864
  0.91, 382.000, 1665309.264
  0.92, 384.000, 1706024.654
  0.93, 386.000, 1747311.736
  0.94, 388.000, 1789173.221
  0.95, 390.000, 1831611.821
  0.96, 392.000, 1874630.251
  0.97, 394.000, 1918231.226
  0.98, 396.000, 1962417.462
  0.99, 398.000, 2007191.671
  1.00, 400.000, 2052556.560
*FLUID INFLATOR MIXTURE, NUMBER SPECIES=2
AIR, NITROGEN
0, 0.4, 0.6
*FLUID INFLATOR PROPERTY, NAME=DUALPR_MIX, TYPE=DUAL PRESSURE, TANK VOLUME=0.125, EFFECTIVE AREA=0.02, DISCHARGE COEFFICIENT=0.4
  0.00, -99000.000,  0.000
  0.01, -98653.989, 158.706
  0.02, -97302.310, 636.201
  0.03, -95944.973, 1434.789
  0.04, -94581.987, 2557.078
  0.05, -93213.362, 4005.943
  0.06, -91839.110, 5784.450
  0.07, -90459.240, 7895.755
  0.08, -89073.766, 10342.965
  0.09, -87682.699, 13128.971
  0.10, -86286.052, 16256.245
  0.11, -84883.840, 19727.720
  0.12, -83476.078, 23546.542
  0.13, -82062.780, 27715.345
  0.14, -80643.964, 32237.051
  0.15, -79219.644, 37114.758
  0.16, -77789.840, 42351.640
  0.17, -76354.567, 47950.855
  0.18, -74913.844, 53915.462
  0.19, -73467.688, 60248.348
  0.20, -72016.118, 66952.163
  0.21, -70559.151, 74029.608
  0.22, -69096.806, 81483.865
  0.23, -67629.099, 89318.008
  0.24, -66156.050, 97534.990
  0.25, -64677.676, 106137.666
  0.26, -63193.993, 115128.819
  0.27, -61705.021, 124511.196
  0.28, -60210.774, 134287.569
  0.29, -58711.272, 144460.789
  0.30, -57206.529, 155033.865
  0.31, -55696.562, 166009.623
  0.32, -54181.388, 177390.801
  0.33, -52661.023, 189180.336
  0.34, -51135.481, 201381.053
  0.35, -49604.779, 213995.693
  0.36, -48068.932, 227026.952
  0.37, -46527.954, 240477.510
  0.38, -44981.861, 254350.082
  0.39, -43430.666, 268647.454
  0.40, -41874.385, 283372.537
  0.41, -40313.032, 298528.125
  0.42, -38746.621, 314116.876
  0.43, -37175.165, 330141.578
  0.44, -35598.678, 346604.976
  0.45, -34017.174, 363509.786
  0.46, -32430.667, 380858.709
  0.47, -30839.168, 398654.446
  0.48, -29242.693, 416899.711
  0.49, -27641.253, 435597.247
  0.50, -26034.861, 454749.844
  0.51, -24423.530, 474360.248
  0.52, -22807.273, 494431.139
  0.53, -21186.102, 514965.240
  0.54, -19560.030, 535965.268
  0.55, -17929.068, 557433.932
  0.56, -16293.229, 579373.944
  0.57, -14652.526, 601788.015
  0.58, -13006.969, 624678.862
  0.59, -11356.572, 648049.208
  0.60, -9701.345, 671901.785
  0.61, -8041.300, 696239.317
  0.62, -6376.450, 721064.503
  0.63, -4706.804, 746380.046
  0.64, -3032.376, 772188.653
  0.65, -1353.176, 798493.035
  0.66, 330.785, 825295.905
  0.67, 2019.496, 852599.980
  0.68, 3712.944, 880407.974
  0.69, 5411.120, 908722.605
  0.70, 7114.012, 937546.583
  0.71, 8821.609, 966882.625
  0.72, 10533.901, 996733.438
  0.73, 12250.878, 1027101.721
  0.74, 13972.527, 1057990.181
  0.75, 15698.839, 1089401.529
  0.76, 17429.803, 1121338.480
  0.77, 19165.409, 1153803.749
  0.78, 20905.646, 1186800.053
  0.79, 22650.504, 1220330.103
  0.80, 24399.973, 1254396.608
  0.81, 26154.043, 1289002.280
  0.82, 27912.703, 1324149.829
  0.83, 29675.943, 1359841.959
  0.84, 31443.754, 1396081.375
  0.85, 33216.125, 1432870.790
  0.86, 34993.047, 1470212.919
  0.87, 36774.510, 1508110.477
  0.88, 38560.503, 1546566.181
  0.89, 40351.018, 1585582.740
  0.90, 42146.045, 1625162.864
  0.91, 43945.573, 1665309.264
  0.92, 45749.594, 1706024.654
  0.93, 47558.098, 1747311.736
  0.94, 49371.076, 1789173.221
  0.95, 51188.518, 1831611.821
  0.96, 53010.415, 1874630.251
  0.97, 54836.758, 1918231.226
  0.98, 56667.537, 1962417.462
  0.99, 58502.744, 2007191.671
  1.00, 60342.368, 2052556.560
*FLUID INFLATOR MIXTURE, NUMBER SPECIES=2
AIR, NITROGEN
0, 0.4, 0.6
*FLUID INFLATOR PROPERTY, NAME=PRMASS_MIX, TYPE=PRESSURE AND MASS, EFFECTIVE AREA=0.02, DISCHARGE COEFFICIENT=0.4
  0.01, -98636.770,  0.020
  0.02, -97267.739,  0.040
  0.03, -95892.855,  0.060
  0.04, -94512.069,  0.080
  0.05, -93125.333,  0.100
  0.06, -91732.601,  0.120
  0.07, -90333.834,  0.140
  0.08, -88928.997,  0.160
  0.09, -87518.061,  0.180
  0.10, -86101.004,  0.200
  0.11, -84677.812,  0.220
  0.12, -83248.476,  0.240
  0.13, -81812.995,  0.260
  0.14, -80371.372,  0.280
  0.15, -78923.620,  0.300
  0.16, -77469.753,  0.320
  0.17, -76009.791,  0.340
  0.18, -74543.760,  0.360
  0.19, -73071.686,  0.380
  0.20, -71593.600,  0.400
  0.21, -70109.535,  0.420
  0.22, -68619.523,  0.440
  0.23, -67123.600,  0.460
  0.24, -65621.802,  0.480
  0.25, -64114.162,  0.500
  0.26, -62600.717,  0.520
  0.27, -61081.503,  0.540
  0.28, -59556.553,  0.560
  0.29, -58025.901,  0.580
  0.30, -56489.581,  0.600
  0.31, -54947.623,  0.620
  0.32, -53400.059,  0.640
  0.33, -51846.920,  0.660
  0.34, -50288.233,  0.680
  0.35, -48724.025,  0.700
  0.36, -47154.324,  0.720
  0.37, -45579.156,  0.740
  0.38, -43998.545,  0.760
  0.39, -42412.516,  0.780
  0.40, -40821.090,  0.800
  0.41, -39224.290,  0.820
  0.42, -37622.138,  0.840
  0.43, -36014.652,  0.860
  0.44, -34401.854,  0.880
  0.45, -32783.761,  0.900
  0.46, -31160.394,  0.920
  0.47, -29531.770,  0.940
  0.48, -27897.906,  0.960
  0.49, -26258.818,  0.980
  0.50, -24614.523,  1.000
  0.51, -22965.039,  1.020
  0.52, -21310.378,  1.040
  0.53, -19650.556,  1.060
  0.54, -17985.589,  1.080
  0.55, -16315.491,  1.100
  0.56, -14640.274,  1.120
  0.57, -12959.955,  1.140
  0.58, -11274.546,  1.160
  0.59, -9584.060,  1.180
  0.60, -7888.511,  1.200
  0.61, -6187.910,  1.220
  0.62, -4482.271,  1.240
  0.63, -2771.605,  1.260
  0.64, -1055.928,  1.280
  0.65, 664.752,  1.300
  0.66, 2390.423,  1.320
  0.67, 4121.071,  1.340
  0.68, 5856.684,  1.360
  0.69, 7597.252,  1.380
  0.70, 9342.764,  1.400
  0.71, 11093.209,  1.420
  0.72, 12848.575,  1.440
  0.73, 14608.851,  1.460
  0.74, 16374.027,  1.480
  0.75, 18144.091,  1.500
  0.76, 19919.033,  1.520
  0.77, 21698.846,  1.540
  0.78, 23483.512,  1.560
  0.79, 25273.026,  1.580
  0.80, 27067.377,  1.600
  0.81, 28866.553,  1.620
  0.82, 30670.545,  1.640
  0.83, 32479.345,  1.660
  0.84, 34292.940,  1.680
  0.85, 36111.320,  1.700
  0.86, 37934.479,  1.720
  0.87, 39762.405,  1.740
  0.88, 41595.084,  1.760
  0.89, 43432.515,  1.780
  0.90, 45274.679,  1.800
  0.91, 47121.573,  1.820
  0.92, 48973.184,  1.840
  0.93, 50829.510,  1.860
  0.94, 52690.534,  1.880
  0.95, 54556.248,  1.900
  0.96, 56426.646,  1.920
  0.97, 58301.716,  1.940
  0.98, 60181.447,  1.960
  0.99, 62065.835,  1.980
  1.00, 63954.867,  2.000
*FLUID INFLATOR MIXTURE, NUMBER SPECIES=2
AIR, NITROGEN
0, 0.4, 0.6
*FLUID INFLATOR PROPERTY, NAME=TEMPMASS_4GAS, TYPE=TEMPERATURE AND MASS
  0.00, 200.000,  0.000
  0.25, 250.000,  0.500
  0.50, 300.000,  1.000
  0.75, 350.000,  1.500
  1.00, 400.000,  2.000
*FLUID INFLATOR MIXTURE, NUMBER SPECIES=2
CARBON DIOXIDE, WATER VAPOR
0, 0.2, 0.8
*FLUID INFLATOR PROPERTY, NAME=TEMPMASS_MIX_INFLTIME, TYPE=TEMPERATURE AND MASS
  0.000, 200.000,  0.000
  0.125, 250.000,  0.500
  0.250, 300.000,  1.000
  0.375, 350.000,  1.500
  0.500, 400.000,  2.000
*FLUID INFLATOR MIXTURE, NUMBER SPECIES=2
AIR, NITROGEN
0.00, 0.4, 0.6
0.25, 0.5, 0.5
0.50, 0.6, 0.4
**
**Amplitude definition to determine inflation time
**
*AMPLITUDE, NAME=INFLTIME
0, 0, 1, 1
*AMPLITUDE, NAME=FLOWRATE
0, 1, 1, 1
**
**Step definition
**
*STEP
*DYNAMIC, EXPLICIT, DIRECT USER CONTROL
0.001, 1.0
*FLUID INFLATOR ACTIVATION
ADB_1GAS_TEMPMASS_INFL
ADB_1GAS_TANK_INFL
ADB_1GAS_DUALPR_INFL
ADB_1GAS_PRMASS_INFL
ADB_MIX_TEMPMASS_INFL
ADB_MIX_TANK_INFL
ADB_MIX_DUALPR_INFL
ADB_MIX_PRMASS_INFL
ADB_4GAS_TEMPMASS_INFL
*FLUID INFLATOR ACTIVATION, INFLATION TIME AMPLITUDE=INFLTIME, MASS FLOW AMPLITUDE=FLOWRATE
ADB_MIX_TEMPMASS_INFLTIME_INFL
**
**Time interval should be changed to 0.01 for accurate XY plots.
**
*output,field,var=pre
***output request for QA 
*output,field,number interval=1
*NODE OUTPUT,nset=qa_testREF_NODES
PCAV
*OUTPUT, HISTORY, TIME INTERVAL=0.25
*energy output,variable=preselect
*NODE OUTPUT, NSET=qa_testREF_NODES
PCAV, CTEMP, CMASS, CMF, MINFL, MINFLT, TINFL
*END STEP