The eighth character indicates the specific test within each of the element test types. Refer to the individual problem descriptions for details.
For the distributed load tests, the eighth character represents the loading options that are tested within the files, as shown in the following table. The loads that are applied depend on the element type tested; therefore, different files that end with the same character may test a somewhat different combination of loads.
1 *DLOAD: BX, BY, BZ, BR, CENT, GRAV, Pn, P, PI, PE, HPn, HP, HPI, HPE, CORIO (for PIPE elements only—file names of CORIO tests with other stress/displacement elements end with a); *TEMPERATURE (not tested for axisymmetric elements)
2 *FOUNDATION: F1
3 *FOUNDATION: F2
4 *FOUNDATION: F3
5 *FOUNDATION: F4
6 *FOUNDATION: F5
7 *FOUNDATION: F6
8 *FOUNDATION: F
9 *FOUNDATION: FX, FY, FZ
a *DLOAD: CORIO (for stress/displacement elements other than pipes)
c *DFLUX: BF, Sn;*FILM: Fn;*RADIATE: Rn
d *DLOAD: BX, BY, BZ, BR, GRAV, CENT, CORIO, Pn, HPn;*DFLUX: BF, Sn;*FILM: Fn;*RADIATE: Rn
e *SOILS; *DLOAD: BX, BY, BZ, BR, GRAV, Pn, HPn;*FLOW: Qn, QnD;*DFLOW: Sn
f *DLOAD: BX, BY, BZ, BR, GRAV, CENT, Pn, HPn;*DECHARGE: EBF, ESn;*DECURRENT: CBF, CSn;*TEMPERATURE
h *DLOAD: HPE, PI (closed-end pressure loading for elbows)
i *DSLOAD: HP, P
j *DSFLUX: S;*SFILM: F;*SRADIATE: R
k *DSLOAD: HP, P;*DSFLUX: S;*SFILM: F;*SRADIATE: R
l *SOILS; *DSLOAD: P, HP;*SFLOW: Q, QD;*DSFLOW: S
m *DSLOAD: P, HP;*DSECHARGE: ES;*DSECURRENT: CS;*TEMPERATURE
n *SOILS; *DLOAD: BX, BY, BZ, BR, GRAV, Pn, HPn;*FLOW: Qn, QnD;*DFLOW: Sn (pore fluid with fully anisotropic permeability)
o *AQUA; *DLOAD: FDD, FD1, FD2, WDD, WD1, WD2, FI, FI1, FI2(2-node 2-D rigid beam)
p *AQUA; *DLOAD: FDD, FD1, FD2, WDD, WD1, WD2, FI, FI1, FI2(2-node 3-D rigid beam)*DLOAD: PPENn
q *AQUA; *DLOAD: WDD (2-node 3-D rigid beam, partially submerged model)
r *DLOAD: ROTA