*VIEWFACTOR OUTPUT

*VIEWFACTOR OUTPUT
Write radiation viewfactors to the results file in cavity radiation heat transfer analysis.

This option is used to write cavity radiation element viewfactor matrices to the results file. This option is available only for heat transfer analysis including cavity radiation.

Product: ABAQUS/Standard

Type: History data

Level: Step

References:

“Cavity radiation,” Section 24.1.1 of the ABAQUS Analysis User's Manual
“Output,” Section 4.1.1 of the ABAQUS Analysis User's Manual

Required parameter:

CAVITY

Set this parameter equal to the name of the cavity for which this output request is being made.

Optional parameter:

FREQUENCY

Set this parameter equal to the output frequency, in increments. The output will always be written at the last increment of each step unless FREQUENCY=0. The default is FREQUENCY=1. Set FREQUENCY=0 to suppress the output.

There are no data lines associated with this option.