*HEADING
 Transfer from Standard to Explicit : pre-tension
 - Explicit analysis
 [base for xs_s_cpe4r_pretens, references sx_s_cpe4r_pretens]
*restart,write
*IMPORT,UPDATE=NO,STATE=YES
ECPE,
*NSET, NSET=NALL
1, 2, 3, 4, 5, 6, 7, 8, 1001
**
** Analysis
**
** This is a dummy step to verify the stress imported from Standard analysis
*ELSET,ELSET=QA_TEST_All_ELSETS_AUTO
ECPE,
*NSET,NSET=QA_TEST_All_NSETS_AUTO
NALL,
*STEP
*DYNAMIC,EXPLICIT
  ,0.000001
*BOUNDARY
NALL, ENCASTRE
*FILE OUTPUT,TIMEMARKS=YES, NUM=1
*EL FILE
 S,
*OUTPUT,FIELD,VARIABLE=PRESELECT,NUMBER INTERVAL=4,OP=NEW
*OUTPUT,HISTORY,VARIABLE=PRESELECT,TIME INTERVAL=2.5e-007,OP=NEW
*OUTPUT, FIELD,TIMEMARKS=YES, NUM=1
*ELEMENT OUTPUT,ELSET=QA_TEST_All_ELSETS_AUTO
 S,
*END STEP
*STEP
further loading from initial tightened state
*DYNAMIC,EXPLICIT
,0.1
*BOUNDARY,TYPE=VELOCITY, OP=NEW
XSYMM,1,,
YSYMM,2,,
NPULL,2,,3.0
*FILE OUTPUT,TIMEMARKS=YES,NUM=4
*EL FILE
*NODE FILE
U,
***OUTPUT,HISTORY,TIME INTERVAL=2.5E-3
***ELEMENT OUTPUT,ELSET=ECPE
**S,
*OUTPUT, FIELD,TIMEMARKS=YES,NUM=4
*ELEMENT OUTPUT,ELSET=QA_TEST_All_ELSETS_AUTO
*NODE OUTPUT,NSET=QA_TEST_All_NSETS_AUTO
U,
*ENDSTEP