*HEADING
 Transfer from Standard to Explicit : Plasticity Test for B21 element
 - Explicit Analysis
 - Plastic material wit combined hardening
*IMPORT,UPDATE=NO,STATE=YES
 RECT, BOX, CIRC, HEX, I, L, PIPE, TRAP
*IMPORT NSET
 ALL, LEFT, RIGHT
*RESTART,TIMEMARKS=NO,NUM=2,WRITE
**
** This is a dummy step to verify the stress imported from Standard analysis
**
*ELSET, ELSET=QA_TEST_ALLELEMS
RECT, BOX, CIRC, HEX, I, L, PIPE, TRAP
**
*NSET, NSET=QA_TEST_ALLNODES
 ALL, LEFT, RIGHT
**
*STEP
*DYNAMIC,EXPLICIT
  ,0.000001
*BOUNDARY
ALL, ENCASTRE
*FILE OUTPUT,TIMEMARKS=YES, NUM=1
*EL FILE
 S,
*OUTPUT, FIELD, TIMEMARKS=YES, NUMBER INTERVAL=1
*ELEMENT OUTPUT, ELSET=QA_TEST_ALLELEMS
 S,
*OUTPUT,FIELD,VARIABLE=PRESELECT
*OUTPUT,HISTORY,VARIABLE=PRESELECT,TIMEINT=1E-06
***OUTPUT,HISTORY,VARIABLE=PRESELECT
*END STEP
*STEP,NLGEOM=YES
*DYNAMIC,EXPLICIT
 ,0.1
*BOUNDARY, TYPE=VELOCITY, OP=NEW
LEFT, 1, 6
RIGHT, 2, 6
RIGHT,1,1,0.08
*FILE OUTPUT,TIMEMARKS=YES, NUM=4
*EL FILE
 PEEQ, ALPHA
*NODE FILE
 U,
 COORD,
*OUTPUT, FIELD, TIMEMARKS=YES, NUMBER INTERVAL=4
*ELEMENT OUTPUT, ELSET=QA_TEST_ALLELEMS
 PEEQ, ALPHA
*NODE OUTPUT, NSET=QA_TEST_ALLNODES
 U,
 COORD,
*OUTPUT,FIELD,VARIABLE=PRESELECT
*OUTPUT,HISTORY,VARIABLE=PRESELECT,TIMEINT=0.025
*END STEP